20 Most Recent
Canon ImageClass MF4570DN Laser Printer - Page 3 Questions & Answers
Wait ir3300
Hi, probably a firmware malfunction or hard drive is defective
WHAT IS ERROR CODE E000009-0000?
This error is related to the fixing film engagement/disengagement, the black gear on the end which is also a sensor flag sometimes break, this usually requires a complete new fixing unit
Canon mf4412 printer error code E100-0001
Code
E100-0001
Description
Error detection on any of scanner motor, laser unit, and BD detection at scanner area.
Remedy
When the same error repeatedly occurs after several times of turning the power OFF/ON, execute the following remedies.
(1) Replace the Laser Scanner Unit.
(2) Replace the Engine Controller Board.
My print quality has diminshed
Dear
The quality of printing mostly depends up on the consumable (toner art.). The toner cart. may have life end. may tested with new toner cart.
If it was refilled or compatible, try to use genuine cart.
Thanks.
I have a Canon Image Class 8580 CDW with Error E070-0000
Changed the Fuser could it be the Transfer ?
Dear
The code due to, ITB/TOP sensor defect, DC controller PCB defect.
Do the procedure to check yourself.
1. Turn off the printer.
2. Hold down the Resume / Cancel Press the POWER - indicator turns green.
3. Release the Resume / Cancel, still holding the POWER.
4. Press the Resume / Cancel 2 times while holding POWER, then release all buttons.
5. When the indicator light remains green - press the Resume / Cancel 4 times.
6. Turn off the printer button POWER. Then turn, this should solve the problem.
If the problem not clear, take the help of trained service engineer to check the connector of the ITB unit, DC controller PCB. • Replace ITB unit • Replace DC controller PCB.
Thanks.
Not finding what you are looking for?