Genie KEP1 Universal Keyless Garage Entry System - Answered Questions & Fixed issues
How do I change the key code in a Genie 35674R Garage Door Opener UNIVERSAL "Wired" Keypad KEP-1 ?
I know this is an old post but in case anyone else has trouble with it...I just replaced this keypad for the 2nd time in 10 years, it just stops working after years of being exposed to the elements. I've changed the code several times but had a lot of trouble with it today in the new one. What finally worked for me when following the instructions to set the switch to "Set" inside the black box, type in your new code and then press and HOLD the star key for at least 5 seconds. Holding the star key down finally worked after multiple attempts to get it to work. Then set the switch in the black box to "Run" and the door should open after typing in your code and hitting *.
7/11/2020 9:24:34 PM •
Genie KEP1...
•
Answered
on Jul 11, 2020
•
237 views
Sun prevents garage door from closing
Swapping the sensors is only a temporary fix. As they get old, they get dirty lenses And/or the ir becomes weaker. The sun only adds to the problem. I suggest replacing the saftey sensors.
How do I fix an exterior mobile home door that's not lining up properly?
Question edited for clarity.
Question moved from Cars and Trucks category.
Look at the corners of the doors that hold the aluminium frame together and if it is a modular door, tighten them up. If it is a solid door, adjustment can be made by shimming behind the bottom hinge with a piece of cardboard. This will move the bottom out and up.
..
2/18/2024 9:28:00 PM •
Building...
•
Answered
on Feb 18, 2024
•
29 views
Garage door opens too far and ends up 2 or 3 inches into the motor housing. How do I fix this issue.
Check the opening limit dial on the garage door opener unit. You can locate the dial that controls the opening limit on the opener unit and use a flat head screwdriver to turn the dial counter clockwise until the door stops about an inch and a half away from the stop bolt. Then, test the door and make sure it does not slam into the bolt. A video tutorial on how to adjust the opening limit of a Craftsman garage door opener is available on YouTube.
If the above step does not work, check the limit switches on the garage door opener. Most garage door openers have limit switches that control how far the door opens and closes. Improperly adjusting these switches can cause the door to stop halfway. Consult your garage door opener's manual to learn how to adjust the limit switches. Make small adjustments until the door closes fully.
Craftsman garage door opening too far and hitting stop bolt easy adjustment (youtube.com)
1/15/2024 10:16:07 PM •
Building...
•
Answered
on Jan 15, 2024
•
28 views
Why Kitchen Countertops are on Top and in Trend?
earth-friendly products is good for us this means it's products that was made from things that could be reuse and made better for our health and environment will be better
10/30/2023 11:40:38 AM •
Building...
•
Answered
on Oct 30, 2023
•
192 views
What is PVC Cover Block ?
What is a PVC cover block used for?
PVC Cover Block is used in Construction to provide space for concrete during shuttering.
..
9/26/2023 12:11:09 AM •
Building...
•
Answered
on Sep 26, 2023
•
40 views
What is exterior rendering?
Exterior rendering is the process of applying an external wall covering to the exterior of a house in order to provide added protection to the bricks it's built from.
The external wall covering protects bricks from the effects of weathering and erosion which can, over time, cause both cosmetic and structural damage.
However, the covering alone is not sufficient as this too is susceptible to damage over time from weather and other environmental factors. Therefore, once the wall covering has been applied, it's usually then painted or a wall coating in order to stop it from cracking and prevent damp from seeping through it and into the home. It also requires regular maintenance and re-painting in order to repair any damage that may occur to the paint or wall coatings.
The whole process of exterior rendering is usually carried out by coating specialists like
Apex Coating Services.
9/9/2023 11:17:34 PM •
Building...
•
Answered
on Sep 09, 2023
•
375 views
Can I paint over a previously painted concrete floor that was sealed with a polyurethane type product?
you did not provide info on the type of the paint and what surface it will be used on - there is difference between the floor, desk, wall and car body... all are flat surface but adhesion and work of the paint differs.
depending on the pre-existing paint, but you need always to "key-in" using 120 grit paper or 150 grit screen.
if paints are of same type, then paint in - if these are two different paints, you need to strip or isolate old paint, and then use new paint.
8/30/2023 12:07:49 AM •
Building...
•
Answered
on Aug 30, 2023
•
329 views
Not finding what you are looking for?