Philips Avent 630 SCF30201 ISIS Single Electronic Breast Pump - Answered Questions & Fixed issues
Hi, I have a Philips SCD361 Monitor. Generally
The issue you are having could be caused by a number of things but the most likely is either interference from a transmitter in the same frequency range or the Monitor has a failing capacitor on the board.
If you can think back to when the issue first started and check to see if you have any new devices that might be on the same frequency range and test them by turning them off for a while to see if it continues though this would not be effective if you live close to anyone else.
If that does not work then use high quality batteries and make sure the unit is placed far away from any windows in the room also make sure any florescent lights are not in use near the unit and make sure its not next to any thing else that uses a power supply that has the square box on the plug that includes using the same outlet.
This particular device use's a low frequency range around 40mhz which can be prone to interference more then a lot of the newer units that use 800mhz to 2Gighz.
If all of the above fails you will have to replace the unit or seek repair from the manufacturer if it's still under any warranty.
6/25/2017 3:41:20 AM •
Philips Baby...
•
Answered
on Jun 25, 2017
•
1,326 views
Hello my name is miki and I want to buy baby
Yes! baby monitor is safe for your baby. I bought baby monitor for my 10 month old baby from http://www.hushbabies.com . This helps us to know when how long he has been awake and when to put him back
down for his next sleep.
Baby Care
7/3/2015 9:10:56 AM •
Philips Baby...
•
Answered
on Jul 03, 2015
•
974 views
My philips avent 1q24 electronic steam wont come on
Most likly a bad capacittor on the little circuit board inside the unit. As it is thermosealed you cant open it without voiding the warranty. The repair however is fairly simple and anyone with rudamentary electronics experience can fix it for you. If you are still having problems let me know on
[email protected]
6/20/2010 12:23:49 PM •
Philips Baby...
•
Answered
on Jun 20, 2010
•
1,393 views
My Pal Scout needs replacement battery spring..
Hi,
I would perform a test use of the spring before purchasing it to reach this conclusion. You can call ahead to several part stores that you've identified to carry the spring and request if test use is possible. Then, work with the stores that say "yes". Thank you.
9/30/2022 5:41:42 PM •
Baby Care
•
Answered
on Sep 30, 2022
•
71 views
Tomy baby monitor srv 400 instruction
Hi
I have Tomy srv 400 but the parent unit is not working. I have attached a photo to show what its giving me when plugged.
If anyone knows how to fix it.
Thank you
4/1/2019 11:49:08 PM •
Baby Care
•
Answered
on Apr 01, 2019
•
3,831 views
Is it dangerous to wear the wrong size of nursing bras?
Usually a woman's breasts engorge very quickly after giving birth and take a few weeks to gain a stable size, usually one size bigger than what she had before giving birth.Because of the quick and unpredictable extent of ****** growth some women end up wearing the wrong bra size, and while wearing a bigger size may just turn out to be uncomfortable, wearing a smaller bra size while breastfeeding may reduce their milk supply and cause a painful infections called mastitis.
4/3/2018 2:57:56 AM •
Baby Care
•
Answered
on Apr 03, 2018
•
1,945 views
How do they work
The basic loop is simple:
Feed
Burp
Change diaper
Get to sleep
Repeat
Then you need to work in a "change clothes" subroutine, which runs once/day, or when the outfit is filthy.
But while that loop is running, you need to frequently:
Maintain eye contact
Smile
Talk (content not important; babies hear high pitches better)
Play (Peek-a-boo works with a wide range of ages, but basically any repetitive action delivered with a smile will amuse a baby)
And snuggling. Lots and lots of snuggling.
10/22/2017 2:46:29 PM •
Baby Care
•
Answered
on Oct 22, 2017
•
878 views
Mag n neef met sy niggie trou
In Suid Afrika die UK en sommige ander lande - JA. In die VSA en sommige ander lande - NEE.
8/21/2017 4:38:35 PM •
Baby Care
•
Answered
on Aug 21, 2017
•
1,182 views
How can I get a copy of the manual?
Manuals are often available for download from the manufacturer.
Step 1: to find the brand and model of your sterilizer
Step 2: locate the website of that brand on the internet
Step 3: search their product and/or support pages using the model number of your sterilizer.
5/3/2017 5:09:15 PM •
Baby Care
•
Answered
on May 03, 2017
•
1,152 views
Not finding what you are looking for?