ESD 7000 Radar Detector - Answered Questions & Fixed issues
Charging port won't recognize charging cord
The port may have come loose inside or has become damaged. OR
The charger may be bad.
If the port is bad it is noticable with the charging cord inserted:
It may have free play movement or wiggle
I have a cobra radar dector esd 737
Detecting of radar or lidar emissions depends on mounting of detector.In My experience it is best to mount it just above windscreen wipers.You must check if your detector is visible from license plate level. This is important for laser detection. For other measuring devices it's only important to be visible.Higher mounting facing downwards will reduce false X and K/Ka signals.It will reduce detecing of true as well, so it is all up to you.You must know that laser detecting only covers your car.It d'ont matter if a cop is 300m or 1800m away.X band has a large emission, and it is easily detected.K/Ka band is a pulse emitting and has a lot narrow detecting point.It is effective at max 800m.In ether case speed can be reduced 20-30 km/h in city, and 30-50 km/h on highway.
My radar detector goes off everytime i accelerate.
by going off do you mean alerting you or is the power turning off if it is alerting you you may have electronic interference in the car if the power is going off it may be as simple as a short in the power cord
cobra 773-889-3087 sells then for 10.00 or you can trade your old detector to them and get the next highest model at a discounted price
Laser alert
This is caused by electrical noise in your car's electrical system. Specifically, the problem is excessive alternator whine. This can be exacerbated by somewhat corroded contacts in your car's cigarette lighter socket or by a somewhat corroded vehicle wiring connection to the back side of the cigarette lighter socket.
One potential solution is to try a snap-on RF filter which is available at your local Radio Shack. You would snap this filter around the positive 12V wire leading to your car's cigarette lighter socket. Preferably, if there is enough free slack in the 12V wire leading to the cigarette lighter socket, you would wrap this wire through the RF filter twice before snapping the RF filter closed around the wire.
I need to know what the signals on my radar
The following is a direct link to the PDF owners manual for your ESD 7000:
ESD 7000Of note, this extremely inexpensive radar detector provides just about the worst performance of any radar detector product currently available from any RD manufacturer. I suggest that you visit radardetector.net to learn more about radar detectors.
Signals
When "X" lights up, this means that your RD is either detecting X band police radar or that it is detecting an X band microwave automatic door opener.
When "K" lights up, this means the same as above except that the radar signal is a K band radar signal.
When "Ka" lights up, then this means that your RD is detecting police Ka band radar since no automatic door openers operate on Ka band.
When "VG-2" lights up, this is supposed to mean that your RD is detecting a VG-2 radar detector detector (RDD). Police use RDDs such as the VG2 and the Spectre to indicate that a motorist is using a radar detector.
Troubleshoot
You should try to find out what type of radar devices your police uses.ESD7000 model does not support some devices such as Ku band radar signal, but it should detect all laser signal.Laser signal is often jammed by sun light.If your police uses radar detector detectors VG2 it will force your detector to hide from it making it invisible for detecting.Try talking to someone who has other type of detector that works in your town.It is possible that you will be forced to buy another model.
Cobra XRS 888 Radar Detector. Can I send my XRS 888 to Cobra to have it repaired?
Question edited for clarity.
Question moved to Cobra.
From the manual. Phone and ask them.
If this product should require factory service, please call Cobra first at 773-889-3087 BEFORE sending the product. This will ensure the fastest turnaround time on any repair.
If Cobra asks that the product be sent to its factory, the following must be furnished to have the product serviced and returned:
1. Send the complete unit, including power cord. (It is not necessary to include the mounting bracket.)
2. For warranty repair, enclose some form of proof-of-purchase,
such as a photocopy or carbon copy of a sales receipt. If you
send the original receipt, it cannot be returned.
3. Enclose a typed or clearly written description of the problem
you are having with your unit, plus the name and address where
you want the unit returned.
4. Pack the unit securely to prevent damage during transit. If possible, use the original packing materials.
5. Ship prepaid and insured using a traceable carrier such as United Parcel Service (UPS), Federal Express or Insured Priority mail with delivery confirmation. Ship to:
Cobra Factory Service, Cobra Electronics
Corporation, 6500 West Cortland Street, Chicago, IL 60707 U.S.A.
6. Please allow three to four weeks before contacting us about the status of your service. Call 773-889-3087 for assistance. If your unit is under warranty, it will either be repaired or replaced upon receipt, depending on the model. If your unit is out of warranty, you will receive a letter informing you of the repair or replacement charge.
https://www.google.com/search?q=cobra+xrs+888+radar+detector+repairs
..
Cobra trapshooter rd3168 manual
I got this free Pdf manual from reliable-store for free and I don't think Ive visited a mechanic or fixya for help for more than 3-4 times out of all the times I fixed the chipper in these 4 years
What does k1 , x1 mean on a cobra radar detector
I got this free Pdf manual from reliable-store for free and I don't think Ive visited a mechanic or fixya for help for more than 3-4 times out of all the times I fixed the chipper in these 4 years
1/25/2019 3:15:30 PM •
Cobra Vehicle...
•
Answered
on Jan 25, 2019
•
1,841 views
Not finding what you are looking for?