Top 20
Panasonic KX-FL511 Plain Paper Laser Fax Questions & Answers
Document jammed
It sounds as through the paper jam sensor is either dusty so needs a clean, or the sensor has stopped working totally & needs replacing, if this item is still under warrentee I would call the company for the repair, if not a local computer repair company will be able to assist you further, most offer a free quotation service if you ask...
I do hope this helps resolve your problem, if you could reply & let me know the outcome, many thanks...
2/22/2018 8:57:03 AM •
Panasonic...
•
165 views • 0 helpful votes
How do I delete stored faxes in a Panasonic KX-FL511 without printing them?
The manual indicates where you may need to reset the unit if the memory is full or even if you just want to clear it, page 89-90.
You may use code: [MENU] [*][8][0] [SET] or [START]
You may also call - 1800-211-7262 for Panasonic's capable Technical Support; be sure to have the serial number of the product ready.
3/4/2015 3:20:29 PM •
Panasonic...
•
310 views • 0 helpful votes
A FAX IN MEMORY
To print your faxes that are stored in the memory, removed and reload the paper and press the fax start.
6/19/2014 7:20:39 AM •
Panasonic...
•
741 views • 1 helpful votes
Call service 3
CALL SERVICE 3" means that the temperature of the fuser does not rise up to or exceed a constant temperature.
The temperature is monitored with the thermistor inside the fuser and detected with the voltage input into IC 300-D19
4/17/2014 8:24:28 AM •
Panasonic...
•
66 views • 0 helpful votes
Panasonic KX-FL402 change drum arror
Apparently the drum needs to changed, a clip is broken, the sensor is being blocked by debris from the cartridge or pieces of paper, a sensor fault or the unit needs to be reset.
Call 1800-211-7262 for Panasonic's capable Technical Support; be sure to have the serial number of the product ready.
4/23/2012 7:59:43 AM •
Panasonic...
•
626 views • 0 helpful votes
Fax machine print light
When you see light print it can be from a few things. This is basically a laser printer with a fax machine so the same problems exist in both. The most common cause by far is simply low toner. If you take out the toner cartidge and gentl shake it side to side then put it back in. Now try printing again. This should be much darker. This may only last a few dozen pages (but can go a quite a bit more if you are lucky) but it shows you that you need to get a new toner cartridge. The other causes can be a image setting in the fax. In the control panel it will show you a setting for how dark it will print. Normally it is in the middle of the range. The last common thing is a fusor wire. This normally shows up as a error first but it can slowly fail. The fusor is the heater that bonds the toner to the paper. If it doesn't get hot enough then not all the toner sticks and you get light printing.Normally the problem is low toner.
1/10/2012 2:06:23 PM •
Panasonic...
•
329 views • 3 helpful votes
How do I clear the 1 new call message
Hi, I get the same thing when I have my fax on and I also have a answer machine connected to my phone if I shut off the answering machine the call messages dont show .Another thing I didnt mention is I use my own phone # as my fax # so if someone faxes me I have to shut the answer machine off or the fax wont come through.So if you are set up like I am this is why you get new call messages on your machine
1/22/2012 9:45:31 PM •
Panasonic...
•
184 views • 0 helpful votes
Panasonic FX KPC 141
Call 1800-211-7262 for Panasonic's capable Technical Support; be sure to have the serial number of the product ready.
2/1/2012 8:52:11 PM •
Panasonic...
•
135 views • 0 helpful votes
Document won't feed
Hi, Paper Pick up Rollers get dirty or worn out with the passage of time.
Hence, require cleaning or replacement if worn out. In case you find
them dirty use
a soft, dry, lint free cloth to clean the rollers. Dont use chemicals
as they may damage the rubber and plastic. However, if needed, you can
use damp cloth or some cleaning liquid such as mild detergent of glass cleaner to damp the cloth. As you have posted your question under Panasonic KX-FL511 is would highlight the steps for it. Im Using a similar model KX-FL612
After lifting the top cover, you have to pull down the under part of it down to locate the rollers
Lift the top Cover, Locate the roller and clean them..Hope it helps! Good Luck!CreativeTECH
12/1/2011 2:54:42 PM •
Panasonic...
•
301 views • 0 helpful votes
Not finding what you are looking for?