Questions & Answers
Show me th TV broken down
You have to download the service manual to your tV to get these details. Try to download it from internet. It will be an impossible link to get as free download. Most of the service manual sites will be paid one.
59 views | 0 helpful votes
SO FAR FIXYA IS BS
Really? Try reading the messages you've been sent.
I've pasted this from your premium support request:
Your TV will not accept an HDMI signal from the Roku box. In the TV specifications on page 104 of your user manual you will note this:
HDMI jack x 2
Note: The Digital-In terminal is not compatible with picture signals of a personal computer.
The Roku box is effectively a PC. It is receiving digital media via the internet and streaming it to your TV in the same way as a standard PC would.
The only way you will get this to work, is with a different type of cable. I would suggest component AV.
Hope this helps. Unfortunately, your purchase of incompatible equipment is beyond our control.
140 views | 0 helpful votes
I have still not received an answer and I placed
hello sorry know one got back to i've just download the user manual you can try this because you haven't got the right remote. go in the menu closed caption auto shut off and the xds id turn that off as well if this don't work feel free to get back to me and i will look at another solution hope it helps
67 views | 0 helpful votes
Picture went out had sound..replaced
This unit has cooling fans and it sounds like they are either plugged or not working. When a ballest usually goes out it does not come on and then go out. It is the coming on part that is hard for the ballest to do when going out. Sounds like over heating problems and if it is the ballest it could be any were on a tv and in many different locations. I would type your model number in and replacement ballest for this model number and go from their. Thanks
100 views | 0 helpful votes
I just replace the bulb in my JVC HD-52Z575
Ballast Board? it is what Powers Lamp, or CK Lamp Fan if it stops running and is not Keeping Lamp Cool
set is designed to shut off to Protect lamp from being burted up, you could have either Bad Ballast Board or Defective Lamp Fan,there is a few test you can do to see which Part is Bad.
1,025 views | 3 helpful votes
Not finding what you are looking for?