20 Most Recent JVC HD-52Z575 52" Rear Projection HDTV-Ready Television - Page 2 Questions & Answers

The sound board is gone.... it's not worth it to repair. Just use the analog audio out from the TV to the external audio system. that's what I do on mine.

I have the same blue shadow with reverse image on my JVC HD-52Z575 Did you see what the problem on yours finally was?

andycjavier,

See my tip at

http://www.fixya.com/TipsAndTricks/thanks.aspx?thid=8580883

Thanks for using FixYa and for the great rating.\

hardrocko

You must get your ON before make any settings on it. Please check the power line first ( fuse and cable). Use the volt meter to check voltage on your tv

The tv "LAMP" LED light indication flashing or ligting up?Yes,the tv projection lamp live are over.Tv require a new projection lamp.

hello sorry know one got back to i've just download the user manual you can try this because you haven't got the right remote. go in the menu closed caption auto shut off and the xds id turn that off as well if this don't work feel free to get back to me and i will look at another solution hope it helps

regards
shaun

Make sure the projector lenses are clean and also the interior of the screen.

If you found this helpful please leave a thumbs up..............

Really? Try reading the messages you've been sent.

I've pasted this from your premium support request:


Your TV will not accept an HDMI signal from the Roku box. In the TV specifications on page 104 of your user manual you will note this:

HDMI jack x 2
Note: The Digital-In terminal is not compatible with picture signals of a personal computer.

The Roku box is effectively a PC. It is receiving digital media via the internet and streaming it to your TV in the same way as a standard PC would.

The only way you will get this to work, is with a different type of cable. I would suggest component AV.


Hope this helps. Unfortunately, your purchase of incompatible equipment is beyond our control.

BSElectric.

Make sure you pick the right input for the right HDMI port,

This unit has cooling fans and it sounds like they are either plugged or not working. When a ballest usually goes out it does not come on and then go out. It is the coming on part that is hard for the ballest to do when going out. Sounds like over heating problems and if it is the ballest it could be any were on a tv and in many different locations. I would type your model number in and replacement ballest for this model number and go from their. Thanks

Ballast Board? it is what Powers Lamp, or CK Lamp Fan if it stops running and is not Keeping Lamp Cool
set is designed to shut off to Protect lamp from being burted up, you could have either Bad Ballast Board or Defective Lamp Fan,there is a few test you can do to see which Part is Bad.

Ur convergence is dead.Must know how to solders?Must replaced 2 convergence ICS and some or all it resistors.Tries websites Tv repair World.com,Tvrepairkits.com to buy a convergence to repair it ur self.The shop will cost u $300 for parts and labors.

your lamp is burned out, buy a new one online and replace according to the instuctions sent with new lamp. this a cheap and easy fix-dont believe anyone that tells you different-they are usually people that work in the tv repair industry and want everyone to think they belong at NASA!!!

did the lamp explode before you changed it ?

It normally means the lamp is in need of being replaced, and its all depending on the use of the TV as well as how long the lamp life is. You should be able to access the lamp via a small section near the rear or the back of the TV unit, if the lamp is blown or faulty it will look the same as a blown light globe.
To obtain a new lamp contact the brands authorised repair agent as they will be able to get trade prices and in turn, give you the best price,
Also make sure that whoever replaces the lamp resets the lamp use time as the TV will still not start if you don't reset the lamp use time as it will still think it has a faulty lamp. I hope this helps, good luck.

First thing try a new lamp.

Yea light engine and it's expensive.$950.00 though is high for the part.Shop around.

You can get the bulb in the cartride complete and just plug the new cartridge in or you can get a Philips replacement lamp from MCM Electronics for $99.00 and take the cartridge apart and replace the bulb. Until you put the door back on the set will not turn on.