Top 20 Mercury Floor Machine Mercury: Ultra DC Burnisher 21in - 1.5hp - 1500rpm - Floor Machine Questions & Answers


The switch has gone bad. Very common on these. The contacts in the switch wear out and then get welded together. The motor draws a lot of power when first started and this is ******* the switch.

Mercury Floor... | 1,063 views | 0 helpful votes


The rectifier is in the top end of the motor. Take the cover off and then the top end plate of the motor. With the bolts removed, you will have to tap and rock the plate to evenly remove it. Carefully look at the marks on the old and new part to be shur you do not make a mistake in the wiring. A drawing and photo might be nice too.

Floor Polishers... | 679 views | 0 helpful votes


Any janitorial supply in your town, or ebay. Your Home Depot or Lowe's may have them as well as Amazon.

Floor Polishers... | 894 views | 0 helpful votes


Timber Floor Sanding and Polishing Melbourne

Use this guy, i have used them before & they are very affordable & professionals for sure

Floor Polishers... | 997 views | 1 helpful votes


What exactly is the question here?

Is this a corded electric Scrubber or a battery one?

Floor Polishers... | 1,067 views | 0 helpful votes


Plug it in,pull trigger

Floor Polishers... | 395 views | 0 helpful votes


Wax remover. Rewax spot after removing wax.

Floor Polishers... | 466 views | 0 helpful votes


the brush is either dirty or you burned the wax.

Floor Polishers... | 427 views | 0 helpful votes


www.cleanfreak.com/Qstore/p001525.htm

Floor Polishers... | 423 views | 0 helpful votes


www.sears.com/search=kenmore%20floor..

Floor Polishers... | 424 views | 0 helpful votes


motor bearing worn or shaft bent.

Floor Polishers... | 735 views | 0 helpful votes


sometimes questions get put in the wrong category, the question has been sent to the correct category.

Floor Polishers... | 353 views | 0 helpful votes


My swing scrub was acting like that from a loose wire at the capacitor... it is after all a capacitor start induction run motor.

Floor Polishers... | 666 views | 1 helpful votes


www.electroluxappliances.com/Owner-Support

Floor Polishers... | 854 views | 0 helpful votes


simply turn them counter-clockwise

Floor Polishers... | 632 views | 0 helpful votes

Not finding what you are looking for?
Mercury Floor Machine Mercury: Ultra DC Burnisher 21in - 1.5hp - 1500rpm - Floor Machine Logo

1 questions posted

Ask a Question

Usually answered in minutes!

Top Mercury Floor Machine Floor Polishers & Buffers Experts

Robert Wooley
Robert Wooley

Level 2 Expert

177 Answers

Brandon Cherry
Brandon Cherry

Level 1 Expert

12 Answers

Are you a Mercury Floor Machine Floor Polisher and Buffer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Mercury Floor Machine Floor Polishers & Buffers

  • Mercury Floor Machine Floor Polishers & Buffers

Most Popular Question

our ultra d c burnisher starts

  • Floor Polishers & Buffers
Loading...