PREFIXES AND SUFFIXES - Page 8 - Answered Questions & Fixed issues
Remove interior door panel
On most cars, you have to find any hidden screws in the armrests and remove those. Then if you have electric windows/door locks lift up around the base of them with a flat head screwdriver to get them to pop out and be able to unplug them. When that is done, you usually can just lift at the bottom of the door panel and you will unpop the plastic inserts as you work around the door.
How to detect overheating? In which part or subsystem the detectors are installed?
1. look at the temp gauge, is the temp higher than usual?
2. Do you smell coolant?
3. Is the coolant low in your coolant reservoir?
4. Some where you my have leak.
5. Next time before you park your car after driving it home
take a large piece of card board or tarp, lay it down,
drive over it park, let your car sit awhile. Now see what
liquids leaked on it. If you see coolant you have a leak.
HDS live says radar source unknown. What is radar source?
Radar is microwave energy concentrated into a beam and bounced off approaching aircraft or ships or used for measuring the speed of cars, etc.
Low level microwave energy can be emitted by many sources - leakage from microwave ovens, various electronic equipment...
Nothing happens when i press the buttons
Moms and remote anything don't seem to mix. Had the same issue with my mother in law. Anyway, you should be able to find the model number on the back of the remote. There are many manual libraries online where you should be able to find a manual for your particular remote. My favorite site is
manualslib.com. Good Luck.
On my prestige alarm system, when I hold the lock button down it makes a chirp noise and locks the door, but when I press the unlock button it unlocks the doors with no sound and it use to make a sound?
Hi there.
On quite a few of the Prestige systems, a quick press (whether arming or disarming) will activate the locks and trigger the audible chirp......but holding the button for 2+ seconds bypasses the audible chirp.
Eliminating simple things first (without knowing which model alarm/remote you have), is it possible that the button is sticking down? The easy way to tell is that the locks operate immediately when the button is released. If you find you have released, but the locks seem slow, the sticking button is a distinct possibility.
There are also options to silence the chirps on some systems. If you do not have the specific alarm owners manual handy, I'd suggest a quick google search will prove helpful. If you do find the manual, saving the document, or even just the text on the page and pasting it into a blank word doc will be handy for future reference. A printed copy for the vehicle glove box wouldn't be unreasonable either.
Cheers,
Where is the valet button located
What model car? Most that I know of are located in the glove box. That allows you to LOCK the glove box with the key after setting valet button. IF in glovebox it may be in console where a lock is installed.
All recalls on thev2003 chevroler siveradp
00-06-01-026L
2018/10/03
Engine Replacement After Severe Internal Engine Damage - Replace Intake Manifold
07-06-01-016E
2018/07/24
Information on Internal Engine Noise or Damage After Oil Filter Replacement
16-NA-222
2018/07/23
Information for Engine Concerns Resulting from Lack of Scheduled Maintenance, Improper Service or Aftermarket Calibrations
06-00-89-031E
2018/03/28
OEM and Remanufactured Engine and Automatic Transmission/Transaxle Identification
06-06-01-010D
2018/01/31
Information on Close-Coupled Converter and Engine Replacement
PIP3343F
2018/01/09
Possible Engine Oil Leak Due To PCV Freeze-Up
PIE0439
2017/12/04
Engineering Information - California Only - Pilot Initiative - Urgent Service Action Required
01-06-01-011J
2017/11/30
Information on Engine Oil Consumption Guidelines
01-06-01-028C
2016/04/05
Engine - Knocking on Cold Start Explanation
12-06-01-008B
2015/03/09
Vehicle - Engine And Sub Systems Flushing Info. (CANADA)
PIP5169
2014/01/07
Engine Controls - DTC P0300 After Engine Repairs
11-00-90-001B
2013/05/21
Engine - dexos 1(R) and dexos 2(R) Oil Specs/Information
04-06-04-054E
2012/08/06
Engine - THIS BULLETIN HAS BEEN CANCELED
08-06-01-008A
2009/07/27
Engine - Drive Belt Misalignment Diagnostics
05-06-01-010B
2007/09/28
Engine - Sealant Usage/Procedures
06-06-01-019B
2007/06/12
Engine - Coolant Loss With No Visible Leaks
07-06-01-002
2007/03/05
Engine - Revised Connecting Rod Bolt Torque
06-06-01-026
2006/12/22
Engine - New Exhaust Manifold Bolts/Torque Specs
06-06-02-026
2006/12/22
Engine - Revised Exhaust Manifold Bolts/Torque Specs.
06-06-04-046
2006/09/12
Engine Controls - MIL ON/Misfire/Misfire DTC's Set
06-06-04-037
2006/08/04
Engine Controls - MIL Function During I/M Testing
02-06-04-015A
2006/03/07
Starting System - Engine No Start/No Crank Condition
05-06-04-029A
2005/06/24
Engine - Rough Idle/Misfire/MIL ON/DTC P0300
05-06-01-014
2005/05/09
Engine - Oil Leaks In Extreme Cold Temperatures
05-06-04-024
2005/03/17
Engine Controls - Revised DTC P1172 And P2636
04-06-04-057
2004/08/11
Engine Controls - Start/Stall/Poor Driveability
04-06-01-013
2004/04/01
Engine - Serpentine Drive Belt Wear Information
03-06-04-062
2003/11/19
Engine Controls - Revised DTC P2135
03-06-04-032
2003/06/16
Engine Controls - MIL ON/Low Voltage DTC's Set
03-06-04-031
2003/06/01
Engine Controls - Revised DTC P1125 Information
03-06-04-033A
2003/02/26
Engine Controls - Revised DTC P0336
03-06-04-015
2003/02/01
Driveability - Revised Engine Cranks Won't Run Diagnosis
03-06-01-003
2003/02/01
Engine/Transmission - Flexplate/Flywheel Replacement
02-06-01-038
2002/12/01
Engine - Knocking or Lifter Noise
02-06-01-028
2002/08/01
Engine - Crankcase Flushing Recommendation
Not finding what you are looking for?