20 Most Recent KitchenAid KUDS50FVSS Builtin Dishwasher Questions & Answers

Need more info. Are you asking about a dish washer or clothes washer?

http://www.manualslib.com/manual/87792/Kitchenaid-Kude60fvpa.html?page=2#manual

Check the breaker box for a tripped breaker. If it is tripped then flip it back on. If it trips again call a repairman, you probably have a short.

Hi,

The scum, film and white residueproblems have started since the reductionof phosphates in dishwasher detergents.

Here is a tip that will help you to solve the problem of films, residue, and scum in your dishwasher.

DishwasherResidue and Film on Dishes

heatman101;'

';
';

Hello & Welcome to FixYa

When the dishwasher fills then it means that the control and the water inlet valve are fine, hum sound itself indicates that the motor is bad and needs replacement. If you hear a hum sound from the bottom of the unit then it is the motor that is bad and if the hum comes from the control then it is the timer that is bad and needs replacement. Please get back to me if you have any other questions.

Kevin

here is a link to installation copy and paste https://www.manualslib.com/manual/931286/Kitchenaid-Kgct305bwh0.html?page=2#manual

It sounds like the water inlet valve has stopped letting water in. With no water the spray bar won't rotate as it is driven by the pump. Generic videos.

Same issue here. WHAT WORKED FOR ME was simply unplugging the dishwasher for 15 seconds (no idea if 15s necessary), and plugging back in. Viola!

If the hole is small you can seal it with epoxy putty. Clean and abrade the area and after mixing the putty make sure it is pushed well into the hole and if possible smoothed over on the underside. Two types that will work.

J-B Weld Waterweld Epoxy Putty, 57-g ' Canadian Tire

https://www.canadiantire.ca > ... > Adhesives Waterweld Epoxy Putty allows you to make permanent repairs in moist or under water applications,Will fully cure in 60 minutes and will adhere to most ... Rating: 4.2 · ‎106 reviews

• J-B Weld SteelStik Epoxy Putty Stick, 57-g ' Canadian Tire

  https://www.canadiantire.ca > ... > Adhesives J-B Weld SteelStik Epoxy Putty is a steel-reinforced epoxy putty stick that is great for use on automotive and machine parts, exhaust systems, plumbing, .. ..

I couldn’t find any error code 2H but I did find an error code H2O. This code means insufficient water pressure. If the display reads 2H, it usually means the start delay function is turned on. The dishwasher will turn on in 2 hours if door is closed. This dishwasher is advanced. To understand all operations you should read the user guide or manual.