20 Most Recent Fisher Price Disc for Digital Arts and Crafts Studio - Page 2 Questions & Answers

its broke buy a new one

Sorry we have no parts locator service here.

Has anyone been using anything beside the stylus your suppose to use? Cause that can damage the screen and make it not come on. Also i seen you said it won't recognize when hooking it up to computer. Make sure the program is installed on your computer and then unhook the cords from device and computer and reinsert them. Let me know what happens.

If you put each figure in two socks and tossed it in the dryer, the socks should protect them from the tumble. I just don't know how long to keep them in the dryer. They might deform if left too long. Once deformed, there is no fix. I imagine a similar effect achievable with a hair dryer, though a lot more tedious.

hi Patty. i have looked all over the internet just for the parts you are asking for but can not find anything. but you could go to this link and see if its any good to you. if not have you tried ebay?. where to buy eggs and veggies for the Fisher Price laugh and Learn Farm...

no contact the manufacturer direct for spare parts

I have the same problem. I did manage to release one side of the toy bar (left side when looking from front) by pressing very firmly on the red plastic tab that's visible underneath, using a metal tool. But on the other side of the bar, the holding tab is hidden by a white plastic cover, which itself is held by 4 white plastic tabs that I couldn't release.

Slide the metal bar sideways out from its little nook, then wiggle the bar out of the numbered fabric strip. You can move the bar up into the numbers 2 or 3 to shorten it. The metal bar can be hard to move, so if it's feeling stiff you might need a small wrench to clamp on and move it.

try toys-r-us or toyworld

Fisher Price cash registerI am assuming that you have removed the base to unjam the drawer, and a brown plastic lever fell out of the white assembly inside and you can't work out how to put it all back so it works. It took me three days to figure it out.On the inside of the base is a long coiled spring. First hook this back over the end of the central drawer runner. Have a ruler or similar flat item handy to release it later.Take the body of the cash register and insert the narrow end of the brown plastic lever through the white plastic assembly, until it engages with the handle mechanism. You will then feel resistance when turning the handle. There is a flat metal strip in the middle of the assembly. On the side of the brown lever is a small projecting peg. Put this behind the metal strip. Put the thicker end of the lever through the rectangular gap in the white assembly.Place the drawer into the body of the cash register so that the back of it engages with the V shaped notch on the plastic lever.Hold the drawer and body together with one hand and carefully lower them on to the base. While there is still a small gap under the drawer, insert the ruler to release the coiled spring. This will engage with the projection under the drawer.Push everything together and replace the screws. Job done!