Apple iPhone 4 Black Smartphone - Page 6 - Answered Questions & Fixed issues

Honestly, I tried to purchase a kit from online, a do-it-yourself kind of kit and let me tell you that it doesn't work. Take the phone to the mall and ask one of the people at that cell phone places to change out the screen, honestly it cost about $20.00 more then he kit online but at least you are guaranteed that the phone will be working once again. I did it and cracked the kit screen also because the instructions where not very clear and there are WAY more screws holding the iPhones together then we actually think. I went to the cell phone place and they got it to work.

I have had this issue with the iPhone 4 and 5. It all comes down to the carrier. I unfortunately have At&t and for that note the cell phone coverage is bad at my house. The iPhone 4 and 5 have a few glitches, in the sense that the antenna is only on top and side. The New iPhone 5c and 5s have three antennas and the call are almost never dropped. If they are it is due to At&t service. Call At&t or your service provider and ask them to rest the service on there end. They will reset your phone to their systems. Usually this works. If not ask them about the closets antenna and if it is down or being worked on. That happened to be the case last year for me at my home. Once they fixed the antenna I got all my calls and never missed ever since. I hope this helps. Best of luck.

Got to Settings > Mail, Contacts, Calendars > scroll down to Sort Order and select First, Last and also back out and select Display Order and select First, Last

Look on ebay. There are few people who do official unlock.

this could be a software problem, take your phone to Apple to check

You need a FB account to get the most out of candy crush. Create a special gmail account under a "handle" and use it to create a FB account. Don't put anything about yourself in it. Just use it to link to candy crush.

iPhone 4 Repair

Just sync

There isn't other LEGAL way to unlock without itunes.

Try hard reset, this has happened to me. Hold the power and home buttons until the logo comes onto the screen. Try this when your phone is plugged in just in case it is dead.

Is this a trick question.....An iPod is not an iPhone.... so why would it have a caller ID?Go to Settings / General / Aboutthis should show all serial numbers, s/w versions, Network ID\'s etc.

In the settings app> wi-fi >slide to green find connection

Maybe it's turned off? Check Settings>Phone>Call Waiting make sure it's turned on

I check the imei number that you provided. It says that the IMEI isn't blacklisted. It also says that this is a valid apple serial number. But something that confuses me, it says that it's an apple iphone 4 registered with at&t, but it also says that it's unlocked.

Excuse this very basic answer first, but it's the simplest fix. Have you checked your Cellular Data feature is still turned on? Go to the Settings app. Select Cellular. Slide the circle to the right. If it's not this simple fix, some people have had luck with the Reset Network Settings option. Go to your Settings app. Select General > Reset > Reset Network Settings. Lots of people have perfect luck with this, but others have found that the problem recurs. Another option is to call your carrier. You do not mention who your carrier is, but Voicemail issues are often a carrier issue and not a phone issue. Some people have had luck by calling their carrier, or going on their carrier's website and resetting their voicemail passwords. Good luck to you!

Does this copied and pasted advice help you? iOS: Forgot passcode or device disabled If you set up a passcode on your iPhone, iPad, or iPod touch, and you or someone else then enters the wrong passcode too many times, your device will disable itself temporarily. Learn what to do if you have forgotten your passcode, or if your device displays a message saying it's disabled.If you enter the wrong passcode six times in a row, you'll be locked out and you'll see this message:

• iPhone is disabled
• iPad is disabled
• iPod touch is disabled

If you can't remember your passcode, you'll need to erase your device using iTunes, Find My iPhone, or recovery mode. Then use a backup to put your data and settings back on your device. Here's how. Use iTunes If you have synced your device with iTunes, you can restore your device.

1. Connect the device to the computer you normally sync with.
2. Open iTunes. If iTunes asks you to enter the passcode, try another computer that you've synced with. Or try the steps below to use recovery mode.
3. iTunes will automatically sync your device and create a backup. If it doesn't, sync the device with iTunes.
4. After the sync is complete, restore your device.
5. When iOS Setup Assistant asks to set up your device, choose "Restore from iTunes backup."
6. Select your device in iTunes and choose the most recent backup.

Use Find My iPhone If you enabled Find My iPhone, you can use it to erase your device.

1. Go to icloud.com/#find to see if you enabled Find My iPhone.
2. Click All Devices at the top of your browser window.
3. Select your device and click "Erase [device]" to erase your device and its passcode.
4. Use the Setup Assistant on your device to restore the most recent backup of your device.

Use restore your device as new or from a backup.

1. Disconnect all cables from your device.
2. Turn off your device.
3. Press and hold the Home button. While holding the Home button, connect your device to iTunes. If your device doesn't turn on automatically, turn it on.
4. Continue holding the Home button until you see the Connect to iTunes screen.
5. iTunes will alert you that it has detected a device in recovery mode.
6. Click OK, then restore the device.

Last Modified: Jul 8, 2014

Does this help? I have copied and pasted it from the www.att.com Support tab under the Wireless heading. I searched for Obtain PUK code. Obtain a PUK Code Instructions: When the error message "ENTER PUK CODE" is shown on the screen of the device:

1. Log into myAT&T.
2. Select Wireless from the myAT&T tab at the top of the page.
3. Select Phone/Device.
4. Click Unblock SIM Card.
5. A new page will open, containing the PUK code for your phone. Enter the code on your phone's screen to unblock the SIM and create a new PIN.

Unblock SIM Card

1. Enter the eight-digit PUK code on the phone, then press OK/Yes. Note: Some Motorola phone users need to enter **05* if "enter PUK" is not already displayed. After entering **05*, enter the eight-digit PUK code and press OK.
2. Select a new PIN code, then press OK/Yes.
3. Re-enter the PIN code, then press OK/Yes.
4. If the codes were entered successfully, the phone is ready for use.

If the incorrect PUK code is entered 10 times in a row, the SIM card becomes permanently locked and a new SIM card must be purchased. If the device is requesting PUK2, call Customer Care at 800-331-0500.

Best is to go here to create your Apple ID. https://appleid.apple.com/account

its Hardware issue check display connector and belt

Create an apple new id, this can be done when you go into the app store, icloud or itunes. Once you have done this you can use the same id on all