20 Most Recent Mitsubishi WD-52525 52" Rear Projection HDTV - Page 3 Questions & Answers

Right next to the other controls on the TV, it is recessed so you will need a paper clip or ball point pen to press it.

The monitor link is not a standard DVI connection, it was used to connect a Mitsubishi HD set top box. You can connect your cable DVR using component video cables and get HD that way, up to 1080i but not 1080p

sounds like you have the pip(pic in pic) button on; try pressing the pip on remote to see if it removes split screen.

The pop was a high voltage arc of electricity that blew some vital components on the main circuit board. The unit is of no use now. Repairs are far more than replacing the TV.

Ballasts were sometimes problems with this set, but I also ran into problems with lamp thermal sensor. It's a small rectangular device sort of cream color and about 1/8th X 3/16th X 3/4 inch in size with lead coming out of one end. Also check safety interlock switch, which is actuated by lamp access cover being properly closed.

see if there is dust inside blocking it.

you have a bad dlp chip hear a link for you so it will help you to unstay. how the light eng http://www.youtube.com/watch?v=eyAykjZ3zs4

http://www.youtube.com/watch?v=yxDAMoqKinA DLP CHIP

DO YOU HEAR THE BALLEST POWER UP AT ALL IT MAYBE BAD OR DI YOU PUT THE DOOR BACK ON THE LAMP ?

http://www.youtube.com/watch?v=ssmnjX8QU8A COLOR WHEEL

NO THE LAMP DO NOT HAVE ENY THING TO DO WITH THE SOUND IF THE LAMP WAS BAD IT WILL NOT RUN AT ALL

YES IT BY THE LAMP

DO YOU HEAR THE FANS RUNING IT SOUND LIKE A OVER HEATING..

CALL A REPEAR MAN OR MITSUBISHI

LAMP FAN IS BAD