20 Most Recent Honda Landa PG 3500 PSI Pressure Washer - Page 8 Questions & Answers

Maybe a cable or linkage broken or frozen.

The engine or the pump?

Check all areas where the grass gets sucked or thrown such as the areas under the mower. Sounds like it could be plugged some place. Check your blades also and see if they are working properly.

depends on the trans type to know what the repair is.

no you don't need a fuel pump if gravity fed.

fuel and carby problems overhaul the carby , check float level, check for full fuel flow

Pulling the trigger or releasing it will make a sudden change to the load on the engine. If the engine cuts due to a sudden load change it might be the governor isn't responding quickly enough or more likely the carb is either partially blocked or maladjusted, though there is the possibility the spark might be weak or the spark plug worn.

Hi. I think you might be looking for the traditional brass flat head screw that is typically found and used to adjust engine idle. This carburetor should have a black plastic knob that you turn to change idle speed. Look where the throttle cable attaches to the cam wheel on the carb. The knob I mentioned earlier makes contact with that throttle cam. Please write back if there are any other questions. If by chance I misunderstood your request please provide more details regarding the problem. Also photos can be a big help too since sometimes different carbs are installed.

Try Parts tree .com they may have one

My guess is fuel feed rebuild your carburator but check the fuel filter first if it is ok clean the carb.

Try Parts Tree Repair Clinic they may have a video

adjust the throttle cable it has probably come loose under the clamp

I am wondering if your belt has stretched and is slipping. Maybe need a new one.

from the sound of it one of your sensors has gone

shouldn't as at idle the setting is resting on a stop