Top 20 Timex 1440 Nylon watch Questions & Answers

Try this: To set time and date: 1) With time and date showing, press SET. 2) Seconds ?ash. Press START/STOP to round time to nearest minute, setting seconds to zero. 3) Press MODE. Hour ?ashes. Press START/STOP to change hour, including AM (no symbol) and PM. 4) Press MODE. Minutes ?ash. Press START/STOP to change minutes; hold button to scan values. 5) Press MODE. Month ?ashes. Press START/STOP to change month. 6) Press MODE. Date ?ashes. Press START/STOP to change date. 7) Press MODE. Day ?ashes. Press START/STOP to change day. 8) Press MODE. Time format ?ashes. Press START/STOP to select 12- or 24-hour time format. 12-hour format has AM/PM. 9) Press SET, at any step, to exit and save settings. Date (day of month) appears in upper part of display in Time mode. Press and hold START/STOP to see month and date in large digits.

Hot to set alarm on my AW91-729

Change the Time Zone ( to Pacific Time) or subtract 3 hours from your NYC time. Don't bother about the minutes.

go here > http://assets.timex.com/manuals/?timexBrand=core

this link is the manualhttp://assets.timex.com/user_guides/W207_M115/W207_M115_NA_EN.pdf

My watch has model number 504-tsk085, labeled Timex 1440 Sports, and Timex provides the incorrect manual for it online. I wrote these instructions after careful experiment: Upper left button: press to switch to a stopwatch, or... Press and hold to enter alarm setting mode. Once flashing press again to enter time/date setting mode. -- you can only do one or the other without exiting the setting mode (time or alarm set). - within the setting mode you use the two right side buttons in obvious ways to set times/dates Exit setting mode by pressing upper left again Lower left button: light Upper right button (when not setting time): reveal date while pressed Lower right button (when not setting time): reveal alarm time while pressed. ALSO: WHILE lower right button is pressed you can change alarm on/off and chime on/off through the four possible settings by secondarily pressing the upper right button repeatedly.

open it carefully or visit store

How to set the date

The manual is right here...http://www.timex.com/info/Product_Instruction_Guides_Downloads

Press the MODE button. Then hold and press reset/lap button for 2 seconds. Press mode button again.Press Start/Stop to set the Hour.Press mode button again. Press Start/Stop to set the Minute.

If its a good watch, take it to a watchmaker. Dont know to find one 30 yrs ago they were inevery city

press and hold mode button until the digits flash (it is to set the alarm) then press again once the mode button, this time the time flash to be set, the digit that flash is changeable, the lower right button is for adjusting, the upper right button is to choose what you are going to change, while pressing the upper right button you will see all you have to change the time , the date, the day of the week. if your done with all of this. press mode button once, i hope i had been helped you.

Hi sicadfvsinfu,

You can easily change the time of your Timex watch by following the steps below.

1. With the time and date showing, press the top left button.

2. Press the right top button (this sets seconds).

3. Press the bottom left button. This flashes the hour; press the top right button until you have the correct hour (there is no symbol for am, pm will show if pm).

4. Press the bottom left button, minutes flash. Press the top right button until correct minutes.

5. Press the bottom left button, month flashes. Press the top right button until correct.

6. Press bottom left button, date flashes. Press the top right button until correct.

7. Press bottom left button, day flashes. Press right top button until correct.

8. Press bottom left button, time format flashes (can be set to 24 hour clock). If correct, you're done. Press top left button if you're done (can be pressed at any step if you're finished).

To turn off the chime and alarm: Press bottom left until in the alarm screen. Then press the top right button repeatedly until the CHIME or CH symbol is gone and/or ALARM or ALM to disappear, then press the bottom left button to go back to main time.

Hope it helps.

Thank you for using FixYa.

no the only way for this open your phone and remoe the speaker in that and it stops sound thanks

Hi kearnst,

You can easily change the time of your Timex watch by following the steps below.

1. With the time and date showing, press the top left button.

2. Press the right top button (this sets seconds).

3. Press the bottom left button. This flashes the hour; press the top right button until you have the correct hour (there is no symbol for am, pm will show if pm).

4. Press the bottom left button, minutes flash. Press the top right button until correct minutes.

5. Press the bottom left button, month flashes. Press the top right button until correct.

6. Press bottom left button, date flashes. Press the top right button until correct.

7. Press bottom left button, day flashes. Press right top button until correct.

8. Press bottom left button, time format flashes (can be set to 24 hour clock). If correct, you're done. Press top left button if you're done (can be pressed at any step if you're finished).

To turn off the chime and alarm: Press bottom left until in the alarm screen. Then press the top right button repeatedly until the CHIME or CH symbol is gone and/or ALARM or ALM to disappear, then press the bottom left button to go back to main time.

Hope it helps.

Thank you for using FixYa.

Hello Mfchester,

Here are the instructions to turn off the chime on your Timex Sports 1440 watch. Please let me know if I can be of further assistance! :)

--Sandy
-------------------------------------

ALARM AND HOURLY CHIME INSTRUCTIONS:

1. Press and hold MODE until HOURS digits, DAY, and A or P (for AM or PM) flash.
   
   
2. Press ADJUST to change HOURS digits. Go through 12 hours for AM or PM.
   
   
3. Press START/STOP to select MINUTES.
   
   
4. Press ADJUST to change.. Press MODE when done.
   
   
5. Press and hold ADJUST, then press START/STOP to turn chime on/off.
   
   
6. Press START/STOP again to turn alarm on /off.
   
   
7. Release START/STOP when done.

Note: Please remember to rate this post if you found it useful.

Hi jaherman,

You can easily set the time of your Timex watch by following the steps below.

1. With the time and date showing, press the top left button.

2. Press the right top button (this sets seconds).

3. Press the bottom left button. This flashes the hour; press the top right button until you have the correct hour (there is no symbol for am, pm will show if pm).

4. Press the bottom left button, minutes flash. Press the top right button until correct minutes.

5. Press the bottom left button, month flashes. Press the top right button until correct.

6. Press bottom left button, date flashes. Press the top right button until correct.

7. Press bottom left button, day flashes. Press right top button until correct.

8. Press bottom left button, time format flashes (can be set to 24 hour clock). If correct, you're done. Press top left button if you're done (can be pressed at any step if you're finished).

To turn off the chime and alarm: Press bottom left until in the alarm screen. Then press the top right button repeatedly until the CHIME or CH symbol is gone and/or ALARM or ALM to disappear, then press the bottom left button to go back to main time.

Hope it helps.

Thank you for using FixYa.

Hi jay_jolene,

You can change the time your Timex watch by following the steps below.

1. With the time and date showing, press the top left button.

2. Press the right top button (this sets seconds).

3. Press the bottom left button. This flashes the hour; press the top right button until you have the correct hour (there is no symbol for am, pm will show if pm).

4. Press the bottom left button, minutes flash. Press the top right button until correct minutes.

5. Press the bottom left button, month flashes. Press the top right button until correct.

6. Press bottom left button, date flashes. Press the top right button until correct.

7. Press bottom left button, day flashes. Press right top button until correct.

8. Press bottom left button, time format flashes (can be set to 24 hour clock). If correct, you're done. Press top left button if you're done (can be pressed at any step if you're finished).

To turn off the chime and alarm: Press bottom left until in the alarm screen. Then press the top right button repeatedly until the CHIME or CH symbol is gone and/or ALARM or ALM to disappear, then press the bottom left button to go back to main time.

Hope it helps.

Thank you for using FixYa.

Here is a link to the Timex support page with the download links for all the different instruction manuals:

http://www.timex.com/info/Product_Instruction_Guides_Downloads


And here is the direct link to the manual for the Ironman 8 Lap model:

http://assets.timex.com/user_guides/W207_M115/W207_M115_NA_EN.pdf


To view the Support Page or the Owner's Manual with Operating Instructions just use your mouse to click on the link, which is the underlined and highlighted text just above. This will open a new web browser page automatically for you and allow you to view the information at the website indicated and the contents of the Owner's Manual.

You may need ADOBE READER installed on your computer to read PDF documents.
You can download this free at WWW.ADOBE.COM if necessary.
Click on the DOWNLOAD ADOBE READER button on right side of the ADOBE home page when you get there, then follow the onscreen instructions to install the software on your computer.

Thank you very much and good luck.

Joe.

Hi rizzomargare,


You can easily change the time of your Timex watch by following the steps below.

1. With the time and date showing, press the top left button.

2. Press the right top button (this sets seconds).

3. Press the bottom left button. This flashes the hour; press the top right button until you have the correct hour (there is no symbol for am, pm will show if pm).

4. Press the bottom left button, minutes flash. Press the top right button until correct minutes.

5. Press the bottom left button, month flashes. Press the top right button until correct.

6. Press bottom left button, date flashes. Press the top right button until correct.

7. Press bottom left button, day flashes. Press right top button until correct.

8. Press bottom left button, time format flashes (can be set to 24 hour clock). If correct, you're done. Press top left button if you're done (can be pressed at any step if you're finished).

To turn off the chime and alarm: Press bottom left until in the alarm screen. Then press the top right button repeatedly until the CHIME or CH symbol is gone and/or ALARM or ALM to disappear, then press the bottom left button to go back to main time.

Hope it helps.

Thank you for using FixYa.