20 Most Recent Canon Pixma Mp250 Allinone Inkjet Photo Laser Printer - Page 6 Questions & Answers

Get a q-tip and wipe roller with rubbing alcohol on the q-tip. This should renew the friction ability of the rollers.

Problem with the logic Card replace with new logic card.

what error you are getting???

A couple of things to check - is in control panel under printers make sure you have it set as your default printer and that it is "online" Also if you have an external hard drive try disconnecting it and if you can print then you have a conflict between your hard drive and printer software. All I do is not print with my hard drive connected.

You may download the manual from here.

Printhead is damaged, or you can try deep cleaning 3x, or get a toilet tissue which is soft, use 50% alcohol/water ratio press it to the head to loosen any dry ink then wife it down, if this fix does not work time to buy new ink cartridge.

get a toilet tissues put a 50% water and 50% alcohol then press on it lightly for 30 secs then wipe it, do it repeatedly, then get a dry tissue paper then press on it for 1 secs then check if the color line has a straight black color and no gap.

Sounds as if the printhead of the colour cartridge has dried up. I would try the following:1. Fold a piece of kitchen tissue (or any other non fibrous tissue) a couple of times and dab it under a tap to create a small damp patch. For best results make sure the water is warm.2. Take the cartridge out of the printer and hold the damp patch over the printhead for 30-60 seconds.3. You should now hopefully have a small ink soaked patch on the tissue with traces of all the relevant colours.4. Then wipe the printhead several times on the dry part of the tissue and you should start to see the colours come through.5. Reinstall and run one more head cleaning cycle.If this doesn't help I would recommend replacing the cartridge, as it has the printhead attached to it.

canon mg5250 error code 5012...what

Hello,Clean the ink head.1. Run a printer maintenance. You can access it via the printer's control panel program in your computer. Run the cleaning procedure. Test it. If it won't fix the problem, then proceed to step 2. 2. Clean the ink head.I hope this helps. Carlo Adrian Canon