20 Most Recent Acer X1261 DLP PROJ SXGA 37001 Multimedia Projector Projector Questions & Answers

Hello i got issue with white and black dots on ACER X1260. The orignal parts was a 1079-6319W... I tryed to put on a 1079-6329W supposed to be compatible. I got white vertical lines on screen and no more pixel dead, this reference seems not compatible ( i think its 18W->19W ; 28W ->29W only). I tryed to clean up with KF special contact F2, chip pins, socket, cards connectors, but nothing worked, still vertical white lines with 1079-6329W chip ( instead of 1079-6319W). I hope this can help everyone in trouble with Acer X1260 and other. DMD chips are not so compatible !!!

I just pulled my apart and cleaned all 3 internal lenses and color wheel, totally the same after cleaning, even though you can see heaps of dust in lens I believe the problem is in the DMD chip, I have some on order from alibaba.com and will see if that fixes them, I have. 2 acer x1260 that have both turned approx 10 and 50 dead pixels each

Replace the dmd chip to rectify

you must go to the supplier proyector, go to the website and get support via ONLINE chat. Merry Christmas

unfortunatly this can not be functioned,
the product unfortunatly does'nt surport this.

See troubleshooting on page 40 of user manual for help projector_manual_7281.pdf (projectorcentral.com)

I had the same problem with my acer x112 , and after checking everything i found out that the problem was the Color Wheel (not necessarily being broken) , it looked new but it was the problem , hope this helps

Great Information sharing .. I am very happy to read this article .. thanks for giving us go through info.Fantastic nice. I appreciate this post.Controle d'acces Maroc

Canon MP140 Error Code injet printer reset procedure:Canon waste ink tank problem.1. Change the waste ink absorber2. Reset waste ink tank counterGo to the service menu;1. With the printer power OFF , press the Power button while pressing and holding the Stop/ Reset button.NEXT2. When the Power is ON, hit the Stop/Reset button 2 times while pressing and holding the Power button.NEXT3. When releasing the Power button and the Stop / Reset button , the printer will go into a service mode. NEXT4 When the ON-OFF lights in Green, hit the Stop/Reset button the specified number of times according to the function listed in below.NEXTEach time the Stop/Reset button is pressed, the LED lights in orange and green, starting with orange.NEXTHit 4 times for waste ink counter reset.The number of the Reset button pressing LED 0 time ... Green Power off1 time ... Orange Service pattern print 2 times ... Green EEPROM print 3 times ... Orange EEPROM reset (EEPROM reset)4 times ... Green Waste ink counter reset On the end press POWER button to exit .FOR USE IN : Canon PIXMA iP1200, Canon PIXMA iP1600, Canon PIXMA iP1700, Canon iP1800, Canon PIXMA iP2600, iP6210D, PIXMA iP6220D, iP6310D, Canon PIXMA MP140, Canon PIXMA MP150, Canon PIXMA MP160, PIXMA MP170, Canon PIXMA MP180, MP210, Canon PIXMA MP450, MP460, MP470, Canon PIXMA MX300, Canon PIXMA MX310, Canon PIXMA MX470

HI recently repair online just few minute after your problem solve you can visit my site https://www.epsonprintersupport247.com/steps-to-fix-error-code-0x10-of-epson-printer/