20 Most Recent
Kenmore 24032\24036 Top Load Washer - Page 10 Questions & Answers
Removing kenmore agitator 417.94862302
You do not have agitator dogs in your machine, yours is made by Frigidaire the agitator can be removed by removing the top of the agitator and remove the bolt. It is screwed directly into the transmission shaft, You want to check the belt to see if it is stretch out , just normal from use.
2/6/2014 11:47:09 AM •
Kenmore...
•
Answered
on Feb 06, 2014
Model 23832100
Sounds like clutch not catching,this may need to bed in .The fact it works okay with no load and no spin with load sounds like clutch/ but also could be motor torque.Ask repair man to recheck work done.
1/15/2014 11:15:50 AM •
Kenmore...
•
Answered
on Jan 15, 2014
Water will not shut off when washer is full on any level setting
There is a tube that goes from a sensor near the bottom of most washers and fits into a fitting near the dial that selects the size of load you will be washing. This tube probably came off of its fitting at one of the ends. Take off the top panel and check behind the dial first. If that looks good you will have to take off at least the front panel of the washer to gain access to the sensor
1/14/2014 5:09:30 AM •
Kenmore...
•
Answered
on Jan 14, 2014
Not finding what you are looking for?