20 Most Recent
GE WBSR3140DW Top Load Washer - Page 7 Questions & Answers
Wjrr4170g1ww bottoms out and grinds the pulley
It sounds like the springs in your suspension system have gotten weak. You can order part # WH16X544, you should need 4 of them. You can take the front panel off by slipping a putty knife under 2 tabs at the top of the front panel. The top can be removed by removing 2 Phillips screws in the front. Each rod can be replaced one at a time, it would help to have some extra hands to help you. There are tabs at the bottom of each rod that must be popped off while the tub is lifted in order to remove them. Hope this helps
Washer wont agitate
tip washer back to look under will be very heavy so get someone to help there should be two belts check to see if one broke or fell off.
Kenmore washer Model 110, Serial No. 27602690 won't spin
If wash cycle operates and water drains as should before spin indicates motor spinning. Chances are bad timer If your a real fixer you can remove timer control from panel check and clean all contacts internally making sure none are stuck closed . (Have had 3 110s in my time).not easy but can be done or buy new about 150$ reassemble and check operation.
Can i ajust the water level to go higher
no,its a set level mandated by the epa (environmental protection agency) and the doe (dept of energy) to conserve water and energy it will tell you this in the owners manual
Adjitator is loose
my clothes are soaked after spinning and leaked water in the floor adgitator is loose
Washer wont spin
google this model ge has lots of transmission issues, check to see if drive spindle is free turning or if it does not let gears turn
Not finding what you are looking for?