20 Most Recent Waste King Whirlaway 291 1/2 Horsepower Garbage Disposer - Page 2 Questions & Answers

Sometimes the disposal rotor is jammed by a piece of chicken bone for example. You can use the supplied hex key to stick into a hole at the bottom and jiggle the rotor free.

??????

Check on the bottom of the unit, the shaft usually goes all the way through and on the bottom has a socket you can put an allen wrench in to twist it. IF that is not the case, you can use a wooden broom handle through the opening in the sink as a lever to break loose any jams

On the very bottom of the disposal there is a small opening in the very middle of the disposal. If you shine a light under the sink and put a mirror down on the inside of the cabinet you should be able to see this. You'll need an Allen wrench to put in the 6 sided hex hole and turn counter clockwise until the disposal turns freely. This should unjam your disposal. Don't forget you may have to hit the small reset button on the bottom too.

How about creating a compost barrel? Pretty easy, there is a site called family handyman that has a pretty straightforward plan for one. But, if you can't be bothered to do that, just google to quickly find a list of items that CAN'T go into a garbage disposal. Most garbage disposals that are installed correctly have a traditional 110/120v plugged into an outlet installed under the sink that you can easily disconnect. If it's wired directly into the house wiring, you'll need to determine which breaker in your service panel to turn off so that you don't get mildly electrocuted or chop off a hand or something. Most disposals have a small hex-shaped allen bolt hole underneath that you find an allen wrench to put in and work the disposal back and forth by hand, that should free up whatever clogs are inside. Make sure you leave some sort of screen or stopper in the drain to stop silverware or random things from falling in that shouldn't fall in like tea bags, ends of onions, tomato stems, nut shells, things that may not "shred" easily. If you need to ultimately replace it, (which is rare and unlikely), you will need to ask a neighbor or someone handy to figure it out, because not to sound like a chauvinist, but most women technically CAN do most things men can, they just don't WANT to, or can be bothered to learn or whatever else, that's why guys fix stuff and women typically don't. Anyway, good luck, I'm sure it's just a little clogged with some junk that your hands can reach in and take back out, I REALLY wouldn't worry about it being broken, I'm pretty sure it's not.

You have a defective switch or perhaps the wiring in the switch box is shorted across the switch contacts. Before you try to fix it be sure the power is off on the circuit that feeds the switch.

Any hardware store has these.

Melody, check fuse/breaker,could be clogged/jammed, motor maybe defective.

There is a bracket and the pipe should be flared on the end. There is also a gasket

There should be a screw hole in the very middle of the bottom. It should be a 1/4" or 5/16 hex shaped hole for an Allen wrench. Insert the wrench into the hole and then move it back and forth Until it spins easily. Whatever is causing the drum to lock up should be extracted from inside before you run it again. Be safe when you've got your hand in there.

Time for a new one. The head has come loose from the motor.

Dear Jim, Although you might be able to take it all apart, you might also find it nearly impossible to re-assemble, and find parts to buy. I suspect you have a motor failure or a short circuit internally. It is possible water has gotten into the motor or controls also, causing the short. My personal experience has been it will need to be replaced. I fix these, and have changed out about 10 of them. God bless your efforts.

I think you should look into getting a model that will last. The last thing you'll want to do is have it break down all the time. Talk to some professionals to see what they suggest, and you should be able to get the help you need making a decision. http://www.coloradoplumbingsolutions.com/residential

The motor is stuck. Use the allen wrench that came with unit and insert into spot under neath the unit and see if you can unstick it. If not successful unit needs to be replaced since it is frozen solid and will not turn nor grind.

Switch is bad.

Bad start capacitor? Low voltage? Rusted bearing? http://waterheatertimer.org/How-to-repair-and-install-Garbage-disposal.html Gene Water Heater Timers Save Money If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

Troubleshoot on following link: http://waterheatertimer.org/How-to-repair-and-install-Garbage-disposal.html Gene Water Heater Timers Save Money If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

Check electric power? Replace disposal? Troubleshoot on following link: http://waterheatertimer.org/How-to-repair-and-install-Garbage-disposal.html Gene Water Heater Timers Save Money If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

Replace disposal Troubleshoot and replacement steps on following link: http://waterheatertimer.org/How-to-repair-and-install-Garbage-disposal.html Gene Water Heater Timers Save Money If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7