Panasonic KX-T7730 Corded Phone - Answered Questions & Fixed issues
MY TELEFON CAN SAVE CALLER
try to check the miss call feature if you have in menu.... some other panasonic have this
3/1/2023 10:45:15 AM •
Panasonic...
•
Answered
on Mar 01, 2023
•
359 views
To enable caller ID phone tes824 through 7730
Hi
I am using Caller ID software and I want to configure PBX to send the log call to our program when an incoming call, then when I answer the call and another after the end call, is there a way to define the PBX to do that
note : PBX now send call log only after the end call.
9/19/2019 9:43:39 AM •
Panasonic...
•
Answered
on Sep 19, 2019
•
3,414 views
Programing Speed dial on Walker W1000 Clarity Phones
I solved my problem by trial and error!
Steps to program speed dial on the Walker/Clarity Model W-1000 Touch Tone Sound Amplifier desk set phone w/large number pad.
1. Choose phone number to program including the (#1) digit for a long distance direct dial if
needed.
Write chosen number(s) on a scratch pad as a guide for numbers. Identify numbers with the
names or contact description (ie."Mom's Cell Phone.")
2. Remove hand set receiver from phone.
3. Press "memory set" button ONCE on the phone located uder the receiver on the desk set.
4. Enter phone number chosen,including area codes and long distance prefixes if needed!
5. Locate the speed dial position button you want for that number...(located adjacent to
tag/pad slot for name and/or phone number to be written after entering.
6. Press the speed dial position button (ONCE). Then replace receiver back in craddle.
7. Try out speed/dial program. Pick up receiver, push speed dial button(position) listen to see if
correct phone number is contacted. Once established as correct; program additional speed dial
numbers: ie family, business, as needed.
8. DO NOT TRY TO PROGRAM THE NATIONAL EMERGENCY 911 NUMBER! Keep this in your
own memory!
9. If you make a mistake while entering a phone number: Stop, Hang up phone and start all over
again in the procedure sequence.
10. Remove white "description pad with slots for names or numbers) from underneath clear
plastic cover.(use a paper clip end to lift up plastic cover). Write name/description for that number
on white pad(ie. "Mom's Cell") Use a PENCIL FOR DESCRIPTIONS!!
11. TO SAVE TIME AND INCONVENIENCE TO PERSONS/BUSINESSES OF HAVING TO
ANSWER YOUR CALLS; CHOOSE A AUTOMATED ANSWERING NUMBER (USUALLY A
BUSINESS ANSWERING AUTOMATED SERVICE (IE. LARGE INSTITUTIONAL PHONE
NUMBER THAT HAS A MENU PROMPT usually a AT&T 800 # will have a prompt menu
USE this procedure to see if you program correctly then once you know how; go back and re-
enter all the numbers that you actually want on your speed dial settings.
6/26/2017 12:13:45 PM •
Panasonic...
•
Answered
on Jun 26, 2017
•
2,105 views
I need user manual
I need the User Manual for Panasonic Model KX-TSC11MXB Made in Malaysia in english - Kindly assist.
5/15/2017 4:48:37 PM •
Panasonic...
•
Answered
on May 15, 2017
•
6,852 views
I would like connect kx-t7730 to tda100 .can I
Yes. However, it will only work if you have the 8-port hybrid card(TDA0170) installed. Besides costing a lot more money(the card, not the phone) the phone uses 4x the power of a 76xx or DT series phone and you only get 12 lousy working buttons.
Carl
9/10/2016 2:44:43 PM •
Panasonic...
•
Answered
on Sep 10, 2016
•
1,478 views
VOICE CANNOT BE HEARD WHILE MAKING / RECEIVING CALLS
have you replace the spiral cord of the handset? if you do may the handset is defective, try replacing the handset, if you have extra unit try to borrow and connect it to your phone just to see if its good or not.
7/30/2016 6:14:26 AM •
Panasonic...
•
Answered
on Jul 30, 2016
•
348 views
Not finding what you are looking for?