Conair Weight Watchers Glass Digital Body Fat Analysis Scale - 1 ea - Answered Questions & Fixed issues
Why does my scale only display RON when I step on it?
I contacted conair about this problem below is the response.
Thank you for your email.
Simply mail us your defective product or part with a detailed letter stating your name,mailing address, model , serial number, a brief description of the problem , a photocopy of your receipt and a cheque made out to Conair Canada for Conair products($5.00) or Cuisinart Canada for Cuisinart products ($10.00) for return shipping. Your product will be serviced and or inspected for possible warranty repair or replacement.
Please note that all replacements will take from 3-6 weeks and will not be replaced immediately. They must go through are technical department for testing.
Please also be advised that we do not have a reimbursement or refund policy.
CONAIR/CUISINART CONSUMER PRODUCTS
100 Conair Pkwy
Woodbridge ON
L4H 0L2
Tel: 1-800-472-7606
Sorry for any inconvenience this may cause.
Regards,
Consumer Service Representative-CP
Error message ErrL
My scale had the same problem. I replaced the battery, but still got the same message. My wife noticed that one of the feet on the bottom of the scale was loose. The feet are twisted on to the scale and held by two small flanges. When I gently pulled the loose foot away I noticed that a small black wire had broke. I used my fingernails to remove a small bit of the wiring cover and twisted the ends back together. I then hide the wires back in a recessed area on the foot and placed it back on the scale. Worked just like the day I got it.
Hope this helps!
5/16/2009 3:35:31 PM •
Conair Weight...
•
Answered
on May 16, 2009
•
3,088 views
How do you use a
The settings 1-10 are for wet and easy-to straighten hair. Like hair that is a little thinner or almost straight.
The settings 11-17 are for damp hair that is about average thickness.
The settings 18-23 are for hair that is thick or wavy.
Lastly, the settings 24-30 are for dry hair that is harder to straighten.
So, the higher up you go, the higher the difficulty the hair is.
Hope this helps! :]
How to adjust the power setting adjustment screw on a conair model hc200b hair clippers
The power setting adjustment screw on the Conair Model HC200B hair clippers is typically located on the side of the clipper near the on/off switch. To adjust the power setting, you will need to locate the screw and use a small screwdriver to turn it.
Here are the general steps to adjust the power setting on your Conair Model HC200B hair clippers:
- Locate the power setting adjustment screw on the side of the clipper near the on/off switch.
- Use a small screwdriver to turn the screw clockwise to increase the power setting or counterclockwise to decrease the power setting.
- Turn on the clippers and test the power setting by cutting a small section of hair.
- If the power setting is not to your liking, adjust it again with the screwdriver until you achieve the desired power setting.
It's worth noting that the power setting is usually a small screw and turning it too much can damage the internal machinery of the clipper, so it's best to make small adjustments at a time. And ensure the clipper is unplugged before making any adjustments.
Not finding what you are looking for?