20 Most Recent Leica Geosystems Leica TS02 FlexLine Total Station Series Questions & Answers


Help me to find my service provider contact cause me too I want to remove puk code in my total station ts02 plus
Thanks

Leica Geosystems... | Answered on Nov 24, 2018


Connect and get best solution of email related issues. Webmailhelps

Electronics -... | Answered on Dec 04, 2019


format it useing nokia 6120c,6220,and c5-00 phone.. or view this site= http://www.makeuseof.com/tag/format-write-protected-usb-flash-drive/

Electronics -... | Answered on Nov 20, 2019


Mkv files to play correctly require quite powerful computer. Try mpg, MPEG codes but even those when used for high definition video my require some processing power.

Electronics -... | Answered on Nov 12, 2019


Flash memory probably corrupted, you may need to format to get it useable, you will lose data but you can try a data recovery app which should retrieve most of the data even after formatting.

Electronics -... | Answered on Nov 05, 2019


Change the region code for all DVD cd's through the supplier

Electronics -... | Answered on Nov 02, 2019


It's possible that you or someone has accidently changed the region code setting on the player.
If you type your model number and the words 'region code' into a search engine, you should find out how to reset it to your region or make it region free.
If that doesn't work there's an electrical fault on the machine.

Electronics -... | Answered on Oct 31, 2019

Tip

How to repair Motorolla Talkabout 250 antenna


I have just repaired four of these radios, with complete success.

You need a tube of black Stixall (currently £5.81 from Tool Station), a skeleton gun and a saucer of water with a good squirt of washing up liquid.

Take the back off the radio, take out the batteries and remove the rear cover by undoing the retaining screws using a screwdriver with a star shaped bit. Unscrew the circuit board now exposed using the same screwdriver bit. Remove the damaged rubber aerial with coiled copper core, being careful not to damage or distort the copper core. It lifts off one of the screw lugs revealed when removing the circuit board. Get rid of all of the old rubber.

Now put the end of the copper coil back over the lug (where it came from) and screw the PCB back on followed by the back of the unit.

Now form a new rubber cover to the copper aerial using Stixall, squirted into place. Squirt it down into the aerial housing so that it will get mechanical purchase from the body of the radio. Put on plenty, completely coating the copper aerial. Now dip your fingers in the saucer so that they don't bond to the Stixall and mold it into a smooth aerial shape. Leave it to cure for 24 hrs and then dust it with flour. Job done.

I have tested my repaired radios and they are great, the new "aerials" have lasted well. I am especially pleased that I don't have to throw them away.

Good luck - regards SJP

on Oct 16, 2019 | Electronics - Others


Plenty here;
https://ksp-electronics.com/en/product/view/5741-ta1319ap

Electronics -... | Answered on Oct 15, 2019


Error. Over Current - Peak current exceeded
Possible causes:
Motor has a short - Phase to phase or phase to ground.
Motor cable damaged/defective.
Motor cables too long.
Acceleration/deceleration ramps too short.
Damaged output phase of inverter.
EMI

Electronics -... | Answered on Oct 14, 2019


Three years is pushing the life of the batteries. Have them checked where your type of battery is sold.

Electronics -... | Answered on Oct 13, 2019


You can use Card Data Recovery. It is the professional SD card data recovery software. It can recover photos, video, audio and documents from SD card, miniSD card, micro SD card, etc. This program has two versions, one for Windows users, one for Mac users. You can visit its official website to have a look.
Card Data Recovery for Windows
Card Data Recovery for Mac

Electronics -... | Answered on Oct 11, 2019


it means you can't write new files or alter the files.
It is cs26466 ?
this has a password protection feature apparently
is it an sd card ? move the tab on the side of it
If it is a usb flash drive I do not know how you get pass the passwor dor how you enter a password when accessing it ?

Electronics -... | Answered on Sep 20, 2019


Write protect in flashdrive could mean chip problem if you cannot partition or reformat the usb drive..you can try usb low level format, partition application..be sure to back up files before doing so.

Electronics -... | Answered on Sep 19, 2019

Not finding what you are looking for?
Leica Geosystems Leica TS02 FlexLine Total Station Series Logo

6 questions posted

Ask a Question

Usually answered in minutes!

Top Leica Geosystems Electronics - Others Experts

Marvin
Marvin

Level 3 Expert

85216 Answers

Brad Brown

Level 3 Expert

18121 Answers

Tom Chichester

Level 3 Expert

54841 Answers

Are you a Leica Geosystems Electronics - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Leica Geosystems Electronics - Others

  • Leica Geosystems Electronics - Others

Most Popular Question

puk code leica total station ts02 serial

  • Electronics - Others
Loading...