Top 20 Black & Decker HC3000 Handy Chopper Food Processor Questions & Answers

Replacement parts for your Black & Decker HC3000 Handy Chopper 1.5 Cups Food Processor can be order online here:

http://www.directpartsandproducts.com/choppers-hc3000-c-1_156_408.html

Good luck!

Available parts for these machines can be found at these links:

Black & Decker FP2510SKT Food Processor
http://www.directpartsandproducts.com/food-processors-fp2510skt-c-1_378_394.html

Black & Decker HC3000 Handy Chopper 1.5 Cups Food Processor
http://www.directpartsandproducts.com/food-processors-hc3000-c-1_378_408.html

Available replacement parts for your Black & Decker HC3000 Handy Chopper 1.5 Cups Food Processor can be found here:

http://www.directpartsandproducts.com/food-processors-hc3000-c-1_378_408.html

Hi,

I looked up for a part replacement for you.

As of now, the bowl itself is not listed in the multiple websites I searched on.

I would like to tell you that you might want to replace the unit and go for a brand new ones as they are fairly inexpensive starting at $14.99.

You may please visit this link to review the options you have and place an order accordingly.

I will appreciate your feedback and positive rating for this solution.
Thank you.

http://estore.fox-international.com/accessories.asp?modelnumber=1152

Yes, screws are often hidden under rubber feet on kitchen appliances.

Hi, go online..... Type in the make and model of your Black&Decker. Then type in "parts and fixtures", you will find the name of the part you need. Good luck

I, have you checked the fuse? The little one inside the plug may have blown, I would start there, good luck

No recalls,what's wrong with it Glitzy?

8 cups

If it was me, I would contact the e-bay seller. Ask him/her if they got it with a GE product or Cuisinart?

Refer to the instructions you received with your purchase. Otherwise, contact the manufacturer at their 1-800# or go online to the B&D website for assistance.

It could be that liquid coolant got into the low-pressure part of the cooling system when it was on its side, and is preventing the expansion valve from doing its job converting high-pressure liquid coolant to gas. My recommendation is to unplug it, wait the 24 hours, and plug it back in. Excess fluid should have drained to the bottom of the cooling system by then, and normal cooling can begin.

Contact Ronson customer care team at 1300 137 798 or e-mail [email protected].

Try putting some water and plug in to heat. when water is hot, stop and try the bowl.

Replacement parts for your Black & Decker FP1610 Food Processor are available online from the following links:http://www.partsourceplus.com/food-processors-fp1610-c-1_378_393.htmlorhttp://www.abtecparts.com/Black_&_Decker_food_processor_FP1510.htmTrust this is helpful!

I would be interested in the lid, chopping blade, and pusher

Hello, GO to this website for the part that you need: Black and Decker FP1510 Parts List and Diagram eReplacementParts com

A number of Black & Decker kitchen appliance manuals are available here: http://useandcaremanuals.com/SearchManuals.aspx?SiteID=4 . However, I do not see a model with 70610 in the model number. The manual for the Power Pro II food processor is available here: http://useandcaremanuals.com/pdf/FP1510,FP1550S,FP1560872.pdf . I hope this helps. Cindy Wells