20 Most Recent Bosch Classixx WFL 2066 Front Load Washer - Page 3 Questions & Answers

There are 2 possible reasons for this .The drain for the washer may be kinked at the back preventing the water being pumped out . The pump is virtually a water circulator and not a pressure pump so any obstruction will keep water in the washer.. Next --the spin cycle may be to slow for the water to be spun out of the clothes. Check the load is not above the recommended weight as this makes the spin cycle slow. IT is better to do 2 washes rather than to cram it all into 1 wash. Check the filter at the pump as they tend to block up with lint and other gunk from the clothes and the water may be unable to get to the pump Powdered detergents are 90% clay( fine as talc powder and used to carry the detergent) and this settles out in the lower parts of a machine so if you use powder I would recommend changing to liquid

take of the child lock by pick the last program you used and pressing the clock button for five seconds

when you changed the bearings did you check the spider for any broken legs on it or have you firmly fixed the belt pully

change the valve

take out plug first check your heater check the motor

take out the plug you need to take of the hose from the tub to the pump remove what you can this will help to take filter out

Hi Irene, drain solenoid problem. regards, nuwan