Please download the User manualf or Nordic track iFit Coach Plus
and see in the user manual, how to do it.
Blessing
[email protected]
cell+whatsAPP:+50588611441
cleal the contacts relais, and replace if necessary. Of course your LUBE the gear and shaft too.Test the elevation motor for problem bearing for repair.sincerely. God bless you
https://www.manualslib.com/manual/583110/Nordictrack-Commerical-2450-Treadmill.html?page=27
Quoting from manual above (may be similar model if not the same.)
7. Turn on or turn off the display demo mode.
The console features a display demo mode,
designed to be used if the treadmill is displayed
in a store. While the demo mode is turned on, the
console will function normally when you plug in
the power cord, press the power switch into the
reset position, and insert the key into the console.
However, when you remove the key, the screen will
show a demo presentation.
To turn on or turn off the display demo mode, first
touch the Demo Mode button. Next, touch the On
checkbox or the Off checkbox.
The servo motor which changes the resistance (under the plastic covers) is winding the cable in the wrong direction. Release tension on the cable by pulling the magnets away from the fly wheel and flip the cable off the the servo motor pulley, this will allow the cable to be pulled in the correct direction.
My treadmill has a little steel rod that flips in and holds the bed up' When you want the bed down you pull the rod back out and it lets it come back down.
Sounds like the overlay on the console has stopped working. If you get beeps on all buttons but not the ones in question, this will need replacing. It’s quite an easy job once you have the parts. Try eBay or the shop you got it from.
This is a situation the controller board motor is Faulty.
They controlled the console CPU BOARD. with 8-12VdC
For CMOS Circuit.,this board has 3 control power supply Some IGTB is faulty: 1) Main motor 2) Elevation motor 3) Console Control
HOwever tight the connector coming from controller board motor to the Console very well, and clean it.
Otherwise replace the Controller board motor.
Blessing.
[email protected]
cell+whatsAPP:+50588611441
https://www.youtube.com/watch?v=p6PkBZrh4KM