20 Most Recent New Balance 1400 Treadmill Questions & Answers

In almost all treadmill error 1 denotes the speed sensor error.
In you case I suspect there is some variation in the alignment of the speed sensor. May it moved away from the magnet Which is fixed on the rotating wheel. Try to make it closer as much as it can, be sure not to keep a small distance .hope it will solve the problem.
If you wish to get some more details about treadmill repair and service then check the following link.

New Balance 1400... | Answered on Oct 01, 2016

Tooshy, sounds like a faulty control board.

New Balance 1400... | Answered on Mar 06, 2016

Unfortunately once the belt has a crease that all she wrote. Belt replacement is the next step.Call Fitness Quest they are the makers of your treadmill @ 1-800-321-9236

New Balance 1400... | Answered on Dec 26, 2015

Motor controls for New Balance can be found by doing a Google search on Treadmill Analyzer and look for the MCB List page of repairs offered :-)

New Balance 1400... | Answered on Jan 10, 2015

get a professional to tighten it

New Balance 1400... | Answered on Jun 16, 2014

You may have a beltand deck problem. Test by the following procedure:
without the poweron stand on the walking belt, push the belt in the, direction it normally turns. If the belt is very difficult to turn (on most treadmill this means that you have high belt/deck friction I first apply silicone lubricant between the belt & deck to see if that clears up the problem. Most problems originate from the belt and deck 75 to 85% of the time.

New Balance 1400... | Answered on Feb 14, 2014

this is indicative the some electronics components is in short circuit in the pcb. You must replace. However RUN the software calibration for diagnose, and fix it. see the block diagram.
you can measure the input voltage for the main motor if there are the motor is o.k and vice-versa
2) you can measure the output meassure from the pcb board is there are NOT the board is faulty for the input voltage motor.

God bless youa08494b5-3ed3-48b4-a4fe-493c0f2df5af.gif

New Balance 1400... | Answered on Jun 06, 2013

1) LUBE the deck belt,you have a WORN deck belt, this happen because you didnot lube according with the schedule maintenance
29 LUBE the rollers bearing too
3) Test the drive belt motor, for worn or crack, or adjust if is possible
4) Test the input voltage motor, if there are the motor need repair
5) Test the output voltage board, for input voltage motor, if there are NOT the board is faulty.
God bless you


New Balance 1400... | Answered on Nov 28, 2012

It is on the circuit board, It is white or gray with silver on the ends and it will be about an inch long and tubular. eric

New Balance 1400... | Answered on Jul 09, 2012

1) adjust the bolts see the diagram attached:


New Balance 1400... | Answered on Jun 13, 2012

Not finding what you are looking for?
New Balance 1400 Treadmill Logo

60 questions posted

Ask a Question

Usually answered in minutes!

Top New Balance Exercise & Fitness Experts

Vincent G
Vincent G

Level 3 Expert

2361 Answers


Level 3 Expert

85216 Answers

Brad Brown

Level 3 Expert

18121 Answers

Are you a New Balance Exercise and Fitnes Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

New Balance Exercise & Fitness

  • New Balance Exercise & Fitness

Most Popular Question

new balance 1400 treadmill

  • Exercise & Fitness