Stairmaster Stepmill 7000 Pt - Answered Questions & Fixed issues
7000 PT will not start up (display flashes)
On that relay board their should be 2 lights engaged:
1.power
2.relay.
It sound like a loose connections there are 3 connections to the board first that I would look is the power connections to see if their is no broken wires, than the connector that goes to the display that may have exposed wires that may be grounding out on the frame and by jostling the connectors and see if either one stops the light flickering and relay clicking.Their can be also cold soldier connection on the relay board. Hope this helps
4/1/2022 1:52:26 AM •
Stairmaster...
•
Answered
on Apr 01, 2022
•
790 views
I just bought a stairmaster 7000pt with a broken console screen. I replaced all the broken parts but it's still not working. Any ideas?
Display reads CONFIG RQRD or NTM CONFIG RQD on Stairmaster Equipment
Probable Cause
The message CONFIG RQRD or NTM CONFIG RQD appears when the console needs to be configured for the machine type it is installed. This message is common when the console has been replaced or if the settings have been changed. Message is commonly seen on various Stairmaster equipment such as bike models 3000CE, 3300CE, 3400CE, 3600RC, 3800RC and 3900RC; stepper models 4400PT, 4600PT, 4400CL, 4600CL and SC916; stepmill models 7000PT and SM916; elliptical model ClubStride 5100.
Corrective Action
- Make sure the unit is in an "idle" state. "Idle" state means the console is not displaying an error or any message that requires data input. The display should basically be freshly powered up, scrolling the EKG or welcome message
- Configure the console for the proper machine type by pressing Level UP, 80, ENTER
- Using the Level UP or Level DOWN keys, scroll through to the proper machine type (Bike, Elliptical, Stairclimber or Stepmill)
- Once the proper machine type is shown on the display select the machine type by pressing ENTER
- This completes the steps necessary when your Stairmaster display reads CONFIG RQRD or NTM CONFIG RQD
Stairmaster Console Message CONFIG RQRD or NTM CONFIG RQD
9/18/2015 9:19:43 PM •
Stairmaster...
•
Answered
on Sep 18, 2015
•
834 views
Trying to change language back to english Cant find the + or , on the console
Console codes require the unit to be in an "idle" state for code to be accepted. "Idle" state means the console is not displaying an error or any message that requires data input. The display should basically be freshly powered up, scrolling the EKG or welcome message.
+, 7424, ENTER Changes the language of the console prompts
0, ENTER
English
1, ENTER
German
2, ENTER
French
3, ENTER
Italian
4, ENTER
Spanish
5, ENTER
Swedish
6, ENTER
Danish
7, ENTER
Japanese
Here's a link to the complete list:
10/1/2014 7:32:05 PM •
Stairmaster...
•
Answered
on Oct 01, 2014
•
712 views
Not finding what you are looking for?