Kenmore 53642 / 53644 Side by Side Refrigerator - Answered Questions & Fixed issues


What Is the Wieght of a Kenmore refrigerator, model#106.57572791 please??

Kenmore 53642 /... | Answered on Oct 04, 2018 | 1,416 views


Replace the cold control

Kenmore 53642 /... | Answered on Jan 01, 2018 | 250 views


yes. check if the fill tube to the ice maker is clog

Kenmore 53642 /... | Answered on Nov 23, 2017 | 276 views


Hello... Love this refrigerator...


Great video from one of my FAVORITE PART-HOUSES...

FOR your part... http://www.appliancepartspros.com/whirlpool-motor-assy-dispenser-wp2252130-ap6006769.html

(good prices (usually... always shop around (+ shipping))


Hope this really does it...

ELSE comment me back I am here daily.


Carnac the Magnificent

Kenmore 53642 /... | Answered on Nov 08, 2017 | 711 views


U have a restriction in drain tube under evaporator coil. So every time it goes into a defrost instead of going down the drain tube it is running over and out the front of fridge

Kenmore 53642 /... | Answered on Oct 28, 2017 | 235 views


You should push water line in valve firmly until you feel it snap into place. You should not be able to pull it out once it's inserted correctly without pressing the little button around water line opening.

Kenmore 53642 /... | Answered on Oct 06, 2017 | 1,038 views


Try cleaning the condensor core.

Kenmore 53642 /... | Answered on Jul 24, 2017 | 169 views


Yes....I can definitely see all your posts. Sorry I don't have a solution for you. :(

Kenmore 53642 /... | Answered on Apr 27, 2017 | 173 views


Installing Hard start Kit 3n1 Supco.

Kenmore 53642 /... | Answered on Nov 26, 2015 | 1,567 views


replace the door cam assy. and door stop.

Kenmore 53642 /... | Answered on Jun 20, 2015 | 1,253 views


the fan may have stop check for air flow coming out of the vents inside the refrigerator otherwise the evaporator may be frozen with solid ice and no air flow to cool.

Kenmore 53642 /... | Answered on Aug 29, 2014 | 58 views


Do u hear fan running in freezer? It only runs when compressor runs! Sounds like your problem:) check it out....

Kenmore 53642 /... | Answered on Aug 29, 2014 | 152 views


what kind of smell ? burning? be more specific

Kenmore 53642 /... | Answered on Jul 12, 2014 | 39 views


Try to tighten and seal the magnets on the door.

Kenmore 53642 /... | Answered on Apr 13, 2014 | 82 views


The fan you should be checking is behind unit , under a cardboard cover , its the condensor fan motor, desined to disapate heat in that section.

Kenmore 53642 /... | Answered on Mar 30, 2014 | 100 views


it means it has overheated please disconnect let it cool for about 4 hrs make sure the compressor area is clean and the fan too reconnect and hopefully will start if not the relay and run capacitor have burned out also check the plug for breaks or burn out plugs......

Kenmore 53642 /... | Answered on Dec 12, 2013 | 63 views


What is the model number listed inside the frig section?

Kenmore 53642 /... | Answered on Jul 07, 2013 | 119 views


- Check if there power is a supply by opening the door of fridge, if there is a light then there is a supply. But no light check the circuit breaker. Or try another outlet for testing. If your fridge is digital control and there is some error display, then reset the error.
- Check the thermostat setting if set to high cool, and check the compressor at the back of the unit if running, if not there is something wrong to your control or compressor itself, if the compressor is operating and no cool at all maybe your unit is out of refrigerant, please call a qualified technician.

Kenmore 53642 /... | Answered on Jun 11, 2013 | 98 views


check thermistors , damper , make sure the control board is allowing the unit to defrost . You can bypass the board and force unit into defrost to make sure the heater is working. If it does go into defrost after bypassing the board than replace the board.

Kenmore 53642 /... | Answered on Jun 02, 2013 | 182 views


3 in 1 starters like the supco that you have pictured can and will cause premature failure of your compressor. newer compressors are not designed to handle the start up current the 3-n-1 provides. I reccomend replaing wiht an original oem part the part number is 8201786. If you still want to use the hard start use the 410 model obviously hook up the red white and blak wires to the compressor the 2 left over leads will connect to the 2 original wires that come in to the compressor I beleive they are red and white. polarity does not matter. good luck Peyton

Kenmore 53642 /... | Answered on Apr 01, 2013 | 8,490 views

Not finding what you are looking for?
Kenmore 53642 / 53644 Side by Side Refrigerator Logo

733 questions posted

Ask a Question

Usually answered in minutes!

Top Kenmore Refrigerators Experts

Jimmy

Level 2 Expert

61 Answers

geob91

Level 2 Expert

128 Answers

John Tripp
John Tripp

Level 3 Expert

4656 Answers

Are you a Kenmore Refrigerator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...