20 Most Recent Toto CST414M-11 Aquia Dual Flush Elongated Toilet - Colonial White - Page 2 Questions & Answers

Send issue to [email protected]. He answers for free

Remove the screw, then go to any store selling nut. Show your original screws, You can ask them plastic type nut. Buy also small silicon tube. This is use to hold the nut after you put it back the screws.

I'd send it back.

Why not just change the hose

I use Channel Lock 430 pliers. The top jaw should be facing you when on nut. Push toward wall. Home depot RIDGID EZ Change Faucet Tool Superior Tool 03825 Basin Buddy Faucet Nut Wrench Wrench to grab metal pvc...

I had this issue as well with my toilet. My chain was unattached and had been sucked down the drain under the stopper valve preventing the toilet stopper valve from completely closing and causing the water to continually run. After re-attaching the chain I noticed when I flushed the toilet that the handle did not rise again until I manually pushed it up. After readjusting the chain to a tighter position where the chain was not floating at all but instead holding the stopper valve in place I again flushed to check the reaction. This fixed the issue of the water continually running and also the handle not resetting itself properly.

Here is the steps I took to resolve my issue:

Step 1: Remove the lid off of the tank.

Step 2: Check to see if the chain coming from the Toilet Handle to the Stopper Valve is loose, unattached, or broken.

Step 3: Flush the toilet and check to see if the problem has been fixed. If not readjust the chain to a different position and flush again.

Step 4: If all is resolved replace the tank lid.

Other possible things to check:
Check the Float Ball to see if it's Half-way or more submerged in the water. If it is it needs to be replaced.

I hope this helps!

Creating a Toto site may not be very difficult but there are various things to worry about other than only production which requires considerable amount of time, patience, and research. Besides, Toto site production cost is different for each company. To know all details regarding Toto site production and precautions needed to be taken, you should visit https://totosol.com/ which is an informational website providing valuable insight on all things related to producing a Toto site. You will get information about how to start a Toto start-up, essential knowledge and knowhow, problems in creating Toto sites, and more. Moreover, the website also provides a list of reliable companies offering Toto site production services.

Tighten seat nuts, they are underneath, you will have pop open the tabs covering seat screw to hold it. If the toilet was level before tile saws installed call tilers back. The closet bolts may have come loose or closet flange is broken.

The fill valve is easily adjusted to set the correct water level inside the tank. The following video will show how this is done. toto fill valve adjustment Google Search

Water Level Adjustment Depending on the manufacturing plant, you may have one of two of the following fill valves: Type A Type B Water Level For Type A and C Fill Valve: Refer to the water level (WL) setting marked on the inner wall of the tank. Allow the water to fill the tank. Turn the adjustment screw clockwise in the (+) direction to increase the water level height (see Illustration 1). Turn the adjustment screw counter-clockwise in the (-) direction to decrease the water level height. Flush the toilet to verify the correct water level. Adjust as necessary. For Type B Fill Valve: There are no water level adjustments. The fill valve has been preset at the factory See page 7 of the linked manual. J https://www.totousa.com/filemanager_uploads/product_assets/0GU048Z_TOILET_IM.pdf

Home Depot sells those

The seat is held into place by two screws going into a rubber insert. Loosen the screws and work/wiggle the seat upwards to remove the rubber inserts.

If compatible and it fits, yes.

Do you have a way to check your water pressure each of these problems could be caused by excessive pressure you may need to install pressure adjustment valve if you can't find another way

Reckon the toilet gets PO'ed f for being used and abused!