20 Most Recent Magic Bullet Nutribullet Blender - Page 2 Questions & Answers

try heating the jar with hot water before removing it

take it apart and so relieve the blade

Do not try repair it manually,as its a concern of electronic gadget,& its hazardous.Get it done from a service agent or instead prefer ton buy a new one.I would suggest Magic bullet blender nbr1201.The Magic Bullet consumes less power than Magic Nutri Bullet when you compare Nutribullet Vs Magic Bullet, but it is more when it comes to the price factor. Though it is not that powerful, you can get Magic Bullet at much cheaper price than Magic Nutri Bullet.Go to the link to know. Nutribullet And Magic Bullet Difference

it probably did. you wouldn't see it in the blades as they are remarkably sharp and shred anything that gets in them.

If they gave you a number, that is not a fax number, try to call it. Or try to locate their customer service department. Sending a fax about a problem with an order won't ensure that the proper people get the information to rectify the problem. Also Try calling this number, and filling out the form on the NutriBullet website. "Our customer service is available Monday through Sunday from 9am to 8pm, Eastern Time by phone at 1-855-346-8874." https://www.nutribullet.com/customer-service.html

ck where the cup goes onto the top make sure it turns on to lock on that is were the switch is to turn it on

try adding a tablespoon of cornstarch it makes a great defoamer i use it all the time

put the cup area under some hot water near boiling and then undo the top with a cloth should come undone then, make sure its hot water.

You may download the current versions of all (free) Nikon software from Current versions of Nikon software Nikon Knowledgebase

Try this page http://www.bullettogo.com/warranty.php