Pulsar Chronograph Watch - Page 7 - Answered Questions & Fixed issues
The hour & minute hands on my pulsar nx14-x001
Without knowing the model of the watch i would say you need a new battery. It is typical for this style of watch to have two batteries or one lithium battery. In either case the analog movement will drain faster than the digital portion of the watch and will stop working first.
9/21/2009 11:34:09 PM •
Pulsar Watches
•
Answered
on Sep 21, 2009
•
709 views
My Pulsar YT57 stops after 2/3 days if not worn
You have to find your nearest watch repair shop and ask to replace CAPACITOR. This is a short name for Kinetic E.S.U. used by watch professionals. After replacing this part your watch will run as new and will keep power reserve as described in this manual:
http://www.pulsarwatches.com.au/manuals_pdf/73_1.pdf
P.S. I would recommend to charge the watch as described in manual first, and only if it does not work, go to the repair shop.
Rate me, please.
7/31/2009 2:48:21 PM •
Pulsar Watches
•
Answered
on Jul 31, 2009
•
1,081 views
Wind is missing
Just visit your nearest watch repair shop. Any watchmaker will be able to replace winding crown.
Rate, please.
7/30/2009 2:52:22 AM •
Pulsar Watches
•
Answered
on Jul 30, 2009
•
44 views
Pulsar v041 9100 no manual
Press both buttons on left side of the watch at the same time to toggle through turning the alarm off and on.
11/7/2008 12:04:10 PM •
Pulsar Watches
•
Answered
on Nov 07, 2008
•
547 views
Pulsar watch band
I have a Pulsar watch and on the expandable band, the casing fell off and can't get it replaced unless we take off a link...To me this was too much trouble, time and expense...I won't buy another Pulsar! Too bad cause I thought it was a beautiful watch.
9/18/2008 9:39:15 PM •
Pulsar Watches
•
Answered
on Sep 18, 2008
•
367 views
I recently got a Pulsar
Im a watch technician for how many years and when iv'e make adjustment to any new watch for me i dont need any manual. The thing iv'e done is keep pushing and pressing the adjustment button and observed what happen and the result i write it down, what im discover new to me for future setting purposes. When setting a Pulsar chronograph watch you just find the set button and press it for 15 seconds , then your watch display will flashing then go to mode button and choose what you are going to set. the Hour ; the Date ; the Alarm and whatever you going to set is there. The operation to set is desame whatever you going to set it's like a cycle. Only the set is need a long press. feel free for further assistance in keep sending more question in comments or doubts that arise your mind regarding this to me,.rate the solution as fixya if it heps you understand in solve your problem.
6/19/2008 1:13:24 AM •
Pulsar Watches
•
Answered
on Jun 19, 2008
•
500 views
Not finding what you are looking for?