Pulsar Chronograph Watch - Page 6 - Answered Questions & Fixed issues

Here is a direct link to one Pulsar watch manual with operating instructions:

http://www.pulsarwatches.com/pdf/PUL_PAR_Series.pdf


If that is not the correct manual for your watch, then just click on the following link:

http://www.pulsarwatches.com/home2.asp#FAQ

Then click on the OPERATIONAL GUIDE button in the upper right hand side of that page.
Then just find the model number of your watch in the list and click on it.

To view the User's Manual with Operating Instructions just use your mouse to click on the link, which is the underlined and highlighted text just above. This will open a new web browser page automatically for you and allow you to view the information at the website indicated and the contents of the User's Manual.

You may need ADOBE READER installed on your computer to read PDF documents.
You can download this free at WWW.ADOBE.COM if necessary.
Click on the DOWNLOAD ADOBE READER button on right side of the ADOBE home page when you get there, the follow the onscreen instructions to install the software on your computer.

Thank you very much and good luck.

Please note that no information was found for a Pulsar 8010 model watch.

You will have to look on the back of your watch for the engraved CALIBRE NUMBER.

Just use your mouse to click on the following link which will open a new webpage for you automatically. Once there you will see a detailed illustration of where to look on your watch for the calibre number:

http://www.fixya.com/PostAnswer.aspx?thid=8784937&ctgid=167&ref=unsl

Once you find your number, just select it from the drop down list on that page in the box labelled INSTRUCTIONS FINDER. Then select ENGLISH as the language, then click on the CHOOSE button right below that.

You should then see your manual open up in a separate window for you to look at.

You may need ADOBE READER installed on your computer to read PDF documents. You can download this free at WWW.ADOBE.COM if necessary. Click on the DOWNLOAD ADOBE READER button on right side of the ADOBE home page when you get there.

Good luck.

Hope this one will help.
http://www.manualsonline.com/mdownloads/3384714e-63b3-4569-adfd-2f0a09c1eb7a.pdf

Any decent watch repair shop will do that. Type in your browser: watch repairs in (your area) and you should find plenty. Rate me, please.

mcdevito75 here, While a battery change is fairly easy, you will need a set of precision screwdrivers, you can improvise but could ruin your watch, Look for a small watch repair shop in your area the $15.00 will equal your time, effort, and tools you"d need. Plus the battery lasts a year.

The watch needs a service an lubrication.

show it in a watch shop to change its battery.

The circuit is going bad.

Hello, and thanks for using FixYa.

unfortunately it is very difficult to identify the watch based on those details. Just open the back cover and see what battery is inside, often its a very small battery that costs a few dollars.

Thank you for contacting FixYa.
You can download an operational guide here:

http://www.pulsarwatches.com/home2.asp#FAQ

Best regards. Jewel

The movement for this watch is obsolete so I cannot find a spec sheet for it. From memory I think it is a 371 (SR920). If you can give me the exact measurements of the area the battery slots into (DEPTH and DIAMETER) (in milimeters) then I can tell you exactly which battery.

There are many sellers offering capaciter kits on ebay. However, these can be quite difficult to fit especially if you have never done it before. I recommend using your local qualified watchmaker to fit it. Seiko (the company behind Pulsar and Lorus) have made Lithium-Ion upgrade kits for many of their models so the upgrade should be beneficial. A good watchmaker should be able to fit it for you within 10 minutes (depending on how busy they are).

Thanks for contacting FIxYa.

That is not a valid model # as far as I can tell. You can get an operational guide by going to the following link and looking for #s on the back of your watch.

Best regards.

http://www.pulsarwatches.com/home2.asp#FAQ

Jewel

mcdevito75 Here, I have the contact info to an authorized Pulsar Daeler, they should be able to help, 800-584-1618 they are the watch Co.

Hi,
Thanks for using Fixya.
Try this: pull out crown to the first click, then push and hold button at 2 o'clock. When the hand is adjusted to the desired time, push the crown back in.
If this do not work, do the same using the button at 4 o'clock.

Good Luck and have a nice day.

Operating manual for Pulsar, YM62. ALARM & CHRONOGRAPH.
http://www.pulsarwatches.com.au/files/instructions/137_1.pdf

This is an exact copy of my user's manual (instructions) that came with the mod. YM62.

Click on my profile (escapement), then click on Tips and Tricks. There you will find link to all PULSAR watch manuals.Rate me, please..

Find it in my tips. Check for: How to remove or add links..

http://www.pulsarwatches.com/home2.asp#Contact_PULSAR

Call Pulsar and they can help you find your band number and tell you if links are still available for your watch! :-) They will ship them to you and you then need to take the watch and links to a reputable watch repair company!

You may have two batteries in your watch - one for analog and another for digital. Check that out and if this is the case - replace the battery for digital part. If there is only one battery - your watch's digital part has electronic failure and you will need professional watchmakers help to fix it.

Rate me, plz.