Pulsar Chronograph Watch - Page 5 - Answered Questions & Fixed issues

Hi, your battery would be the renata 371. Type it in on eBay and it will come up

just put the hour hand forward or back 1 hour

Mate I hope this link helps.... http://www.ehow.com/how_5890599_set-time-pulsar-digital-watch.html

sadly, if the battery is indeed dead, it's time for a new watch. the cost to replace the battery will be the same as buying another one off ebay, pawnshop, craigslist etc.

Pulsar battery replacement can be found at amazon, here: Rayovac Batteries Lasts as Long Costs Less. Best of luck

Model numbers on Pulsar watches are normally stamped on the back plate. I have included the website address of Pulsar for you.

Return it to the store you bought it from. I bought something that was similar to your' purchase, but mine was from a garage sale. Thought I got the bargain of a lifetime...wrong!

If it is a screw on back you will need special tools but if it is a push on back you will be able to remove with a small knife

No. Most likely not. Try contacting the manufacturer and give them a description of your watch. They most likely wont be able to help you becuase you need the numbers off the back of the watch in order for them to identify the watch...

here> http://www.pulsarwatches-europe.com/Instruction

They have a rechargeable battery in them,you'll have to go to jeweler or a watch repair store.the battery is not cheap!!! I had my wifes fixed a few years ago the battery cost $68.00,but she likes the watch so it was worth it.

You'll need to go to a jeweler to get a new battery,usually they have to order it, BE PREPARED for a price shock. ihad to get one for my wife's watch a few years ago $68.00 just for the battery another $10.00 to put it in.

instructions on link belowhttp://service.seiko.com.au/i/seiko/documents/technicalguides/Y739A.pdf

Hi
I have a soft copy of the owner manual..If you give me your e mail I can sent it in Pdf format.Thanks
[email protected]

I don't know that you can. A watchmaker may be able to help though. Could be the hands are hitting something and stopping the watch.

To restart the watch, you have to short the battery with a pin that sits under a sticker on the back of the watch. The sticker is supposed to explain that. You can usually do it with a pair of sharp scissors or tweezers. Without "jumpstarting" the watch, just installing a new battery won't start the watch. (I don't know why.)

Did you check the watch battery? Pulsar watches run a long time! If a new battery does not start it up you can take a can of air and just squirt a little in the area where the battery goes (very gently) to blow out any dirt then install the battery and put back on. If it is still not working you need to take it to your local jewelry store to have an estimate for repair, usually 60.00 to 80.00. I hope this helps!

You can call a company called Coserv they are the main watch repair company for Pulsar. Many times the bezels are not available on the older watches but it is worth a phone call to see. Coserv is the repair service all jewelers use! Coserv in NJ 1-800-722-4452 hope this helps!!

You can call a company called Coserv give them the model number and ask them how to set the watch. They are the main repair company for Pulsar, and are located in NJ. Their phone number is 1-800-722-4452 tell them your local jeweler advised that you call! thank you!

This is a complicated repair, not just a battery exchange. Go to a watchmaker. Probably 40 bucks