20 Most Recent Maax Brio II One-Piece Neo-Angle Corner Shower with MAAX IES 1/2 System - 1 - Page 3 Questions & Answers

watch a few how to's on youtube

Plumbing | Answered on Jan 20, 2020

Request Cuisinart 63-3187-8 installations directly from the manufacturer.

Plumbing | Answered on Jan 05, 2020

you don't you replace it

Plumbing | Answered on Jan 05, 2020

Might be your filter jamed so you can test with clean the filter. My website - Cleck Hare

Plumbing | Answered on Dec 26, 2019

If a replacement switch is available and you know how to replace it

Plumbing | Answered on Dec 24, 2019

The cartridge has a leaking o-ring or is faulty. Replace the cartridge under warranty and grease it up with Water Pump Grease when you refit it.

Plumbing | Answered on Dec 22, 2019

Can you tell us more about what you mean by Disable?

If you mean,how can you stop water from flowing, there are usually shutoff valves in the hot and cold water supply lines under your sink (nothing to do with the faucet itself).

Plumbing | Answered on Nov 18, 2019

Need more information make of faucets so forth

Plumbing | Answered on Nov 14, 2019

You can try at http://www.ps2i.biz here you can get all professional plumbing services at very reasonable price.

Plumbing | Answered on Nov 13, 2019

Leaking from the stem or handle 90% of the time means all you need is a new cartridge or new O rings or seals, depending on the model of your faucet.
Phister has a warranty https://www.pfisterfaucets.com/parts-support/warranty-information
and if they are like other faucet manufacturers with a similar warranty, just take the bad part(s) to your local authorized Pfister dealer and they will exchange them over the counter. Otherwise, you can contact Pfister through their website.

Plumbing | Answered on Oct 30, 2019

There are a lot of variables. Are you on a shallow well pump? It sounds like the well doesn't make much water. Check your well tank pressure. With 0 psi of water (drain the pressure) There should be 2 psi of air less than than the start up. If the pump is set to start at 30 psi, there should be 28 psi of air in the tank. It sounds to me like either the tank is shot, or the pump doesn't make much water. If you leave a faucet on while putting air in the tank and air comes out the faucet, then, the bladder is shot.

Plumbing | Answered on Oct 30, 2019

Not finding what you are looking for?
Maax Brio II One-Piece Neo-Angle Corner Shower with MAAX IES 1/2 System - 1 Logo

10 questions posted

Ask a Question

Usually answered in minutes!

Top Maax Plumbing Experts

Jay Saari
Jay Saari

Level 1 Expert

18 Answers

john h

Level 3 Expert

22486 Answers

Brad Brown

Level 3 Expert

18165 Answers

Are you a Maax Plumbing Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Maax Plumbing

  • Maax Plumbing

Most Popular Question

remove shower valve maax shower leaking

  • Plumbing