20 Most Recent VillaWare 5785 Smoothee Bar Work Top Blender - Page 7 Questions & Answers

you checked at your nearest electronic shop,I think the motor available in that shop

https://youtu.be/i5E-t09PFL4 you watch this video & your problem is solved

so order one fixya doesnt sell products

fixya doesnt sell products

https://www.youtube.com/watch?v=LfY_-VA5m8A https://www.youtube.com/watch?v=AhXiPiaie1I

Hello, Rebecca - Please see my reply here: https://www.fixya.com/answer/answerpageslideview.aspx?thid=29753915&ctg=142&brd=3705 Best wishes.

Are you twisting in the right direction to release. I think you put on and twist to lock and twist the other way to unlock. https://www.youtube.com/watch?v=JPKGp3KFjcY https://www.youtube.com/watch?v=4XehR2C_6n0 manual https://www.manualslib.com/manual/1444596/Starfrit-024300.html?page=6#manual

typically, you can't repair it.

that happens to the best of them. Try heat soap, vinegar, and a tight grip to get it off.

blenders are: power cord, switch, speed control, and motor. A disassembly and VOM meter is required to determine which part is defective.

Use https://www.google.com and the words manual and whatever manufacturer and model it is to see manuals.

fixya is not ninja

Yes you can replace it for some kind of better device. I recommend you to check reviews about quiet blenders before purchasing some kitchen tools like that one.

https://www.bakedeco.com/images/manuals/USD-R-5AM.pdf

Is probably a binding problem with the motor shaft bearing or the circuit card is fried. If you've tried giving it a good cleaning and that didn't work it's a good bet the unit is junk. Suggest buy a new one.

Go on the Logik blender website and request parts info.

Most small appliances cost more to repair than they are worth. Unless it needs a simple switch or a cord plug it's probably junk. Suggest buy a new device.

Best to contact manufacturer if possible or try manualsonline.com :-)

As stated earlier it could be the shaft needs lubing, remove the bottom part of the blender blade... the rubber thing that engages on the motor. I started with WD-40 and worked some lithium grease into it. Spins like new now.

loose damaged or dried up seal