As soon as you turn it on? That sounds like either a Bios Password or a Hard Drive Password? So, are you the original owner of this laptop or is it Sizzling Hot (stolen)?? How can you be smart enough to set a Bios or Hard Drive password, then forget it?
You can download the WEBcam and device drivers from ASUS WEB site.Select your model motherboard/computer/laptop, and make sure you select driversthat matches your Windows operating system. Please click on this link to theirWEB support site : -http://support.asus.com/download/download.aspx?SLanguage=en-us
your boot partition is corrupt and windows is trying to load, since you dont have the recovery disk or the OS disk you can :Follow these steps to access the Windows Recovery Environment: 1. Turn the computer on, and immediately press and hold the F8 key. 2. After several seconds, the Advanced Boot Options screen will appear. 3. Use the up and down arrow keys to highlight Repair Your Computer, then press the Enter key.4. Accept or change the language and keyboard selections, then click Next. 5. Use the mouse and keyboard to select your Windows user name from the drop-down list, and enter your Windows password, then click OK. 6. The System Recovery Options menu will appear. It will include several Windows Recovery Environment options, typically including the following: * Startup Repair * System Restore * Windows Complete PC Restore * Windows Memory Diagnostic Tool * Command Prompt
Dear Friend,Usually, when you accidentally deleted your cam software, it does not really mean that it will not work. I am sure that it will activate with either Msn messenger or Skype. The software is call Dr. Eye and is kind of hard to find.Good Luck!
there are a couple things to check, delete all the browsing data under tools- internet options. Go to windows update and make sure its up to date. Then do a virus and spyware check. depending on the operating system the hdd may need a defrag or disk cleanuphese things usually make a pc run way smoother
If your half portion of your keyboard is working then it must be a hardware problem. You can use this alternate option
Steps to use On-screen Keyboard: * Click on Start button. * Now click on All Program option. * Next go to Accessories. * In accessories look for On-screen keyboard if you don't find then look for Ease of Access and in the Ease of Access folder you will found the On-Screen keyboard now click on that.
After clicking you will get a Keyboard on your monitor now whatever you want to type or write you can do it using your mouse.
Hi there! Your computer shows a blinking cursor after the start up is sometimes caused by an incompatible app that is in your computer. Now try this steps so we can check on what's causing it. Restart your computer then start pressing f8 then select safe mode now it should load you up to the repair mode of your computer if it loaded up w/o any problem then that means there's no problem with the computer it's just one of the things loading up when your computer starts that's causing the problem. If your using windows xp press start>run>then type ms config then go to the tab that says start up you'll need to disable one or two of the items this part is a trial and error because you need to find out which one is causing a problem and you don't have to worry because you could always enable the things you disabled the same way.
Sounds like the main lead of the keyboard has come loose, either that or the key board needs to be replaced. Here is the link to the video instructions on how to replace, I would follow the instructions on the removal and check the main power cable of the key board and make sure it is not loose before you buy another key board, cost for a new key board should range from 8 to 15 dollars. http://www.youtube.com/watch?v=1vRglqfQjyE Hope this helps. :)
your laptop can't detect your hardisk drive first- go to cmos setup of your laptop then check if your harddisk is installed second- make your hdd on first boot. then exit and save your settings if no harddisk apear in your cmos setting your hardisk dirve has worn out or dead you have to replace it and reinstall the software..
