i need to rewire and ignition switch for a Murray riding mower, model # 0-40606X8B. What is the wiring? The switch uses a plug in block so there is no "re-wiring" involved. There is a potential ...
Question about Garden
Can malfunction of PTO or other safety switches prevent start up of mower tractor will not start, replaced and tested new battery (OK), engaged and disengaged PTO...engine turned over and ran...mowed ...
How come I can't start my John Deere LA115 after RIO shut it down? The Reverse Interrupt Override switch is supposed to let you keep the blades engaged while using reverse. Be sure PTO is off and ...
replaced new battery , but it won't start. is there a switch somewhere i check to see if petrol going through? several switches, all safety switches that I don't recomend doing without. Usually a ...
Question about John Deere Garden
...combination problems involving the coil kill wire and the PTO activation, I would suspect the PTO switch is bad. I do not have a schematic for the 300x, however I most of the functions are ...
Question about Cub Cadet Garden
...are pulled back instead of shutting of and shuts off when in forward position ? could it be a switch is bad if yes what switch? Sounds like someone has been working on the wiring, probably ...
...and will not restart. The engine will turn over but it will not start. Check your seat safety switch under the seat there is a switch so if you get off the mower it will shut off and not ...
...the mower with the clutch pedal pushed down,blade engagement in off position, there may be a safety switch bad or a wire pulled off of one or more of them or a bad starter solenoid which is a high ...
...- is magneto shot? model 608 I need the electrical diagram. might be caused by turn on/off ignition switch being faulty? There can be as many as 5 safety interlock or kill switches on these machines, ...
2,432 questions posted
Usually answered in minutes!
1,006 Questions
710 Questions
725 Questions
285 Questions
244 Questions