Craftsman 17.5 hp 42 in. Deck Lawn Tractor - CA Model "blades" Questions

Ad

Craftsman riding mower noise when blades engaged This year at some point the engaged blades became very loud. I have bought new blades, but it is still loud when I engage the blades. When I put on the

Ad

Question about Garden

1 Answer

...me know what can be wrong with it There are two safety switches that work off each other when the blades are engaged. The seat switch and blade engage switch. Someone has to be in the seat when the ...

Ad

...on a john deere LX178 Why isn't the center blade on a john deere LX178 turning? The deck and blades were removed to sharpen the blades and after reassembling deck, center blades are not

What will cause blades on J.Deere G100 mower to Freely turn by hand without causing Spindles or belt to turn even though Bolts are still tight and when installed Blade turned only if spindle turned Do

John Deere L110 blade brakes wont stop blades from spinning My L110 works fine except when the blade engagement lever is positioned to stop the blades, the blades continue to spin. I checked the blade

Question about Husqvarna Garden

1 Answer

very bad vibration when engaging the blade Bad vibrations when engaging blades is usually caused by an out of balance blade. Out of balance blades occur due to damaged and/or bent blades. The fix is ...

...The blade seats against a shoulder on a spindle and held in place by a nut. Sometimes replacement blades are not shaped the same as the original and changes the blade cuttnig height but other than ...

Question about Craftsman Garden

1 Answer

mows crooked When I mow the center of the deck where the two blades meet the grass is taller and now I have lines in my yard. I replaced both blades and also replace all bearings in the mower deck. ...

Question about Garden

1 Answer

the blade from turning as you remove the nut.Do NOT but a blade before you get the old one off.Some blades use a star shaped hole others use a round one.You need to know which you need,as one will not

Question about Briggs & Stratton Garden

1 Answer

Uneven cutting There is a dip in the grass between the 2cutting blades. I believe one of the blades may be bent. Is there any other adjustment that would cause this condition. Has anyone tried the ...

Not finding what you are looking for?
Craftsman 17.5 hp 42 in. Deck Lawn Tractor - CA Model Logo

2,428 questions posted

Ask a Question

Usually answered in minutes!

Top Craftsman Garden Experts

john h

Level 3 Expert

22486 Answers

Sheldon Dedek

Level 3 Expert

909 Answers

rjivaro

Level 2 Expert

158 Answers

Are you a Craftsman Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...