Craftsman 24 Hp 48" Deck Yard Tractor "pto switch stops engine" Questions

...up from seat engine stops,pull in either handle engine quits,have everything ready to mow and pull up on pto switch and nothing happens ether switch bad fuse blown behind dash or pto bad if pto ...

...PTO switch on a John Deere GT235. I have replaced the seat switch and the PTO switch. Check and adjust your RIO switch{reverse implement option}near the trans if so equipped.What happens when you ...

...pto switch do so. If you have check wiring from switch to the pto coil. Many times the wiring at the pto coil is rubbed by the belt until it wears the wire into. You can also try energizing the coil ...

...PTO switch on (even though the PTO won't activate and the blades won't be engaged). If the fuse doesn't blow, the problem must be within the PTO clutch. If the fuse still blows, it must be in the PTO ...

...PTO switch and deck still would not work so I replaced the PTO clutch with a new one and while the deck was off, I checked to make sure the spindles were free and after I intall the deck back I tried ...

...pto switch & re engage , but it will intermittenly cut off at radom . the engine stays running ( except 1 time the engine also stopped ) . mower is 5 years old has original battery that still ...

...switch (with PTO on) was making contact and after a few minutes the tractor shut down. Then ran the tractor without turning on the PTO and the tractor ran fine without stalling. Could it be the seat ...

...- neutral switch is OK - some safety ? not closed ? Park brake switch ,pto switch and seat switch will all shut down the machine,pto and park will also keep it from starting,so start at the

PTO safety switch other than on seat ?... Engine stops the instant PTO lever moves, Assuming its not seat switch since it starts and runs/drives fine until PTO is touched. Curious if there is a switch

PTO pump, can it affect starting as well? No idea where to start trouble shooting with all of these issues...Any ideas please? safety switch,unhook the ground wire from coil,if it starts then a safety