Husqvarna Chain Saw 20" Bar "61" Questions

I need a drawing of a carburettor on a 61 Huaqarrna chain saw\r\nwhere do I get it? It is a husqvarna Chain saw You didn't specify of its a 61 or a 61 Rancher. Here's the info you need to take to your

Can you recommend a replacement 14in. bar & chain that will fit a Husqvarna 61 chainsaw I need a smaller bar for my Husqvarna 61 chainsaw and would like to fit an Oregon 14in. bar and chain - not ...

Cannot find adjustment oil screw on my Husqvarna 61 Chainsaw Oil screw on Husqvarna 61 Chainsaw The 61 has a 4 position oil pump, the adjuster is a black plastic screw located to the top right hand ...

Carb assembling question I bought a Husky 61 chainsaw which was not running. I bought the carb kit, but since the original was disassembled I do not konw : how to install the diaphragms and gaskets on

I require an ignition pick up coil to suit a model 61 Husqvarna chainsaw. Availability and cost? The IPL for a Husqvarna Chainsaw model 61 made on or before Feb 1980 lists pn-501 61 72-01 Here: http:/

husquvarna 61 spring in handle how to replace spring http://www.mediafire.com/view/zidxhij6pi77lo6

...completely clear. recoil starter good. Piston OK, no scoring.spins easily plug out.Husky Rancher 61 white top. Husqvarna 61 1980 02 Chainsaw Parts your emergency brake is on,pull back on the lever ...

husqvarna 61ff spark plugs problems no spark plugs The early 61 has a coil on the right side, and an electronic pack at the left side of the flywheel, if there is no spark it is nearly always the ...

how to clean iner crank shaft casing small particles of piston stuck to walls with out spliting husqvarna 61 chainsaw not much point in doing so, engine is shot

What are the Cylinder Head or all torque settings for the Hasqvarna Chainsaw 61 Torques settings for the 61: Head bolts - 10 Nm Crankcase bolts - 8 Nm Clutch - 35 Nm