LG WM-2277HW Front Load Washer "duet cold water rinse" Questions

...been rinsed in hot when removed. all rinses are supposed to be in cold on this model(whirlpool duet sport) Did you check to see if the hot and cold are hooked up backwards? Try switching

...hot/cold and drain because the rinse uses cold water and u may have a cold water issue with the water inlet valve, the water inlet valve cold coil may have gone bad. test it with a meter and ...

...cold rinse it rinses with HOT water, I assume it is the control or some one put the wiring to the wrong terminals on the water temp controller. What do you think it may be? Try reversing the water ...

...front load washer won't rinse with cold water no matter how the cycle is set. If set on COLD/COLD, it will wash in cold, but rinse in hot. I have the same problem, were you able to fix it?

...Duet ht Washer starts washing fine, it drains then it starts flashing FH and wont take in water for the rinse cycle. It does this for every cycle, it will wash fine but after it drains and is suposed ...

...water and set the maching to cold wash cold rinse it won't rinse unless I turn the hot water value on not sure on that one most machines are cold fill now,,think it is to do with the valves been ...

duet washing machine throughs out a FH code My machine starts the cycle out fine then at about 29 minutes left of the cycle it will stop and give a the code FH and stops. I push the restart button and

cold water so I know the cold side works. First off make sure your hoses in the rear are on correctly there is Stamp on the back of the unit H=hot C= Cold if that is ok we will need to look deeper let

Duet (15 yo). Why doesn't it rinse in cold water any longer? Probably your (15 yo) Duet is overdue for retirement.

the water temp on cold it is hot water that it rinses with even if it is set on cold Are the hoses connected to the correct inlet valve on the machine? If so, then the inlet valve itself may be faulty