LG WM-2277HW Front Load Washer "door latch" Questions

...door latch got a DE error, then replaced the door latch assembly. It tries to lock, but will not engage. I also changed the pressure switch IE error because the water filled enough to blow open the ...

...door latch switch that doesn't tell the computer that the door is actually closed. Before you actually replace the latch switch, make sure the wire connectors are securely attached to the latch ...

...on. The door is locked but the washer will not continue to run? That is a door switch error problem. The door latch is not sensing the door closed. You may need to replace the door latch

...Check the latch assembly switch for continuity and whether your latch is working correctly. Check whether the machine will start if you apply pressure to the latch area on the door during

door latch the call was for. lg front load washer filled to capacity and blow the door open."per customer" but had errror code DE. so I replaced the pressure switch and the door latch, which was ...

...door latch error. If you've already tried to unplug the machine and that didn't correct the issue, the door latch assembly will need to be ordered and replaced to fix the issue. The latch ...

...Door latch, Wiring or Control. This error or fault code indicates that the door is not latching properly. Check the lid or door operation to be sure it's not binding and that the door alignment is ...

...latch would need to be replaced. Here's one: http://www.appliancepartspros.com/lg-door-lock-switch-6601er1004c-ap4441836.html . If the door locked failed with the door closed or the washer is under ...

...door latch, notch ( a protruding part which goes inside to latch & activate door switch) & the door switch for any damage. For Top load machines the notch is near the hinges & inside the ...

door latch is and remove the 2 screws holding it in. Then put the screw back in but add a washer on the inside before you screw it back into the latch. Do this on both screws and it will set the latch