spark plug gap for honda 160cc engine The Gap is 0.028 and the Spark Pulg should be an NGK BPR6ES.
...Honda 160cc OHC engine. Mower owned by relative-little maintainence. Running rought and fouling spark plug. Installed correct replacement items--air filter, spark plug, blade, fresh oil, new gas, and ...
160cc, 21" Self - Propelled Lawn Mower Problem i don't know where oil drain plug is You'll find most Briggs and Statton Engines have an oil drain plug directly on the bottom of the engine
Honda 160cc mower engine starts and dies. The engine will start fine but dies a few seconds later and fuel leaks from the carb / air filter. I have checked the carb mounting, installed a new air ...
Question about Husqvarna Garden
...one. Easy way to tell is put a little bit of carb cleaner in the spark plug hole then try to start it. I it fires up and then dies then the carb is not getting the gas to the engine. Hope this
...Honda GVC 160cc engine. It is supposed to start after two pulls when cold and did so since I bought it in 2006. But, just recently it takes 6-10 pulls to start it. When hot it always started on the ...
...honda engine, and is 2 years old. Like the other guy says drain the oil out. Disconnect the spark plug wire (for safety). Place the mower onto a stable platform to work from. To remove the drain plug ...
...engine baffle. Then, place the mower blade back (making sure it's facing the correct way with bottom of the blade facing the ground) and tighten the bolt. Remove the clamp and return the mower to ...
what spark plug does my lawn mower take 11b-106c401 if its a honda engine then it will probably be either a BPR4ES OR BPR5ES
Honda engine. First 3 years never had an issue with the thing starting. Past 2 years it has been a battle. I have read of a few similar situations on this site. Here is what I have done to this point.
744 questions posted
Usually answered in minutes!
420 Questions
215 Questions
193 Questions
129 Questions