...lt 1000 dies when i try to engage the mower deck Hello, Check the seat switch. If it is out of alignment/loose, the machine logic thinks that the operator is not present (on the seat), and will die. ...
Question about Craftsman Garden
LT-1000 18 hp. engine starts and runs fine at idle but when you attempt too engage blades or move the mower in reverse it dies Sounds like a micro switch issue, check the switch under the seat this is
lt 1000 riding mower. Now when I mow it nearly dies going over short grass. I have to raise the blade to the tallest height to keep running. What would this be caused by? you need a govenor adjustment
...a LT 1000 that dies unless the clutch is pushed in. This takes place in all gears including neutral. there is a safety switch that is hooked too the clutch pedal.change that and you should be all
...LT 1000 17.5 OHV WILL RUN WITH NEW BATTERY, BUT DIES WHEN DISCONNECTED... SON IN LAW JUMPED IT OFF WITH A 12V TRUCK SYSTEM You can jump off a off truck ,just dont have the truck running the altnator ...
...LT tractors in the 1000 Series use a seat switch that is located under the left front of the seat. The wires connecting to the switch are quite crude and can get snagged by a tree branch or bush and ...
lt 1000 quit running while mowing . found fuel filter clogged replaced finished mowing . did another lawn right after no problem next time i used it about a week later made one pass and died replaced ...
...lt 1000 I just changed both Blades on my Craftsman LT1000. Now when I mow it nearly dies when I mow even short grass. What could the cause be? Sounds like you installed the blades backwards, so the ...
Question about Garden
lt 1000 mower nearly dies when going into taller grass, I have to raise the deck to the highest position. I just replaced both blades thats normal but if you want it could be a govenor has come out of
295 questions posted
Usually answered in minutes!
1,998 Questions
1,006 Questions
710 Questions
725 Questions
285 Questions