Question about KitchenAid Blenders
...blender with the flashing lights then you will need to remove the motor base cover and check the motor for a circuit. If it is open circuit then either replace the motor or locate the thermal fuse ...
...blender on, it runs for only a few seconds, then stops and all the lights on the panel flash on and off. More often than not it will need the motor to be replaced, only Kitchen Aid parts will do, ...
Question about KitchenAid Blenders
how do you replace a bad circuit in Kitchenaid blender KSB50B4 flashing lights no motor noise It is more likely the motor is faulty than the circuit board. Test the motor with a meter.
Question about KitchenAid Blenders
...Blender KSB5WH3 flashing lights how to get to the fuse Have read solution for flashing lights and can not see the fuse along the red wire. I can not pull the motor out to clearly see all. So how does ...
...lights begin to flash randomly and nothing happens. I've even let it sit in this mode for up to 5 minutes and nothing. Can anyone help me. This blender is brand new, its been in the box unused for ...
...ran out of the bottom of the pitcher and all the lights on my blender started flashing. I've tried tightening the blade, but it doesn't seem to tighten... I think I'm going to have to call ...
...blender won't turn and flashes lights Motor open circuit most likely. Check the field coils for continuity if one is open it is possible a fuse in the field has failed. It is a job for someone with ...
...Blender Classic We were using our machine to make smoothies with the kids and it simply stopped running. The lights still come on but are flashing and the machine simply makes no sound but the ...
...blender. it was working fine and then stopped.my son tried pushing other buttons to make it go again and now two of them are stuck in and flashing. I have been searching for an answer to this same ...
77 questions posted
Usually answered in minutes!
57 Questions
26 Questions
22 Questions