gears seem to be intact. Any suggestions where to look next? You are going to DESTROY YOUR MIXER by kneading dough with the flat beater. Read the directions. They spell it out in big letters. Only use
...beater will not move. Any ideas? You have probably stripped a gear in the gear housing. Here is the breakdown of the gearbox: ...
...were out of sync, by this time their probly stripped. IF you can get the gears, one must resemble a X and the other must resemble a + when installed, so they look like this X+ that way they wont
...does turn I just took mine apart for this same issue. What i found was the plastic beater drive gears have been stripped by the motor worm gear. I am currently looking for these parts to replace
...beater skips This will be caused by a stripped gear. However there are several gears that may have stripped and you will need to take the mixer apart and inspect the gears. I would need the model ...
beater does not move. It sounds like the nylon gear is stripped out. It is a rather easy to replace and also inexpensive. A gentlemen posted a step by step site to replace the gear. The link is http:/
stripped beater gear Seems the wife dropped a spoon in while it was running, and now the gear for the right beater is stripped. Took a while to figure out how to take it apart. Anybody know where I ...
...heard before it stopped. Beater will not turn at any speed setting. drive gear or shear pin stripped. Common on this model. Return to repair centre. Expect to pay approx $150.00 to repair,
beater? you most likely stripped the plastic gear (Worm gear???). This gear is designed to fail to prevent the motor from burning out under EXTREME loads (i.e. when a metal piece falls into the bowl).
beater will not turn. It sounds like maybe the gears are stripped when this happens? What parts would I need to repair this problem? I was able to take the mixer apart and found the gear that was worn
12 questions posted
Usually answered in minutes!
493 Questions
357 Questions
285 Questions
205 Questions
183 Questions