aquasmart lid lid wont lock Is the lid lock tang on lid broken. 2.9 Lid Lock The Phase 7 Washer uses the same lid lock that is used on the Phase 6 series 11 & 12 machines. The difference being is ...
Question about Fisher and Paykel Washing Machines
WL80T65CW1. Why is it displaying fault 234 and will not cycle? I OPENED THE LID LOCK & IT LOOKED A SALTY CORROSIVE TEXTURE ON EACH END OF CONNECTION. ALSO THE TOP LID GROOVE THAT SLOTS INTO THE LID ...
it just started flashing a F3 code, can you please tell me what that means/ thanks paschal F3 means lid switch failure. Heres what the service manual for your washer says about the failure. Flashes if
amana washer lid lock wont quit blinking washer was not in use and lid was up. lid lock light started blinking and now washer will only fill and drain-will not wash or spin Your washer lid lock button
says lid and won't work for my kenmore oasis elite, when ever i push start it says lid, dials light up and flash, and nothing happens Check the lid switch... sometimes if something heavy or someone ...
Question about Whirlpool Washing Machines
My whirlpool top load washer won't drain and spin This is likely to be a problem with the lid switch.the lid switch is activated by the lid stricker when you lower the lid.these machines will normally
Question about Maytag Washing Machines
Lid on my maytag bravo top load washer won't go into the latch to close I replaced the lid strike and the lid latch and when I went to close the lid the strike wont go through the lid latch to close, ...
My Kenmore elite 100.24942301 Lid switch problem My Kenmore elite 100.24942301 has a problem with the lid switch. We close the lid to start the washing process, but after filling with water the ...
The agitator wont turn on unless I slam the lid shut lid switch The most common cause of the symptoms you describe is a lid switch malfunction. The lid switch is usually mounted under the washer top ...
...plthrsn64 , You should open up a separate problem for this but I will post as a solution for the Lid Lock Issue. For the FAV6800AW that is you machine type correct? The "LO" console error is "Lid ...
28 questions posted
Usually answered in minutes!
74 Questions
42 Questions
35 Questions
17 Questions
9 Questions