error 1 when machine is turned on you can hear a 'click' like its going to start but after 1 or 2 seconds a message ' err1' come across the screen 1) adjust the speed ...
Question about Exercise & Fitness
...turns for those 2 seconds too before cutting out, please mate im praying you can help :( Dear Sir:The error code E1or E2 coming from this reasons.1) Adjust the speed sensor, see the diagram attached, ...
turn tread mill on. counts 3 seconds and the belt does not move. the console goes blank after 8 seconds then e1 flashes. follow this steps and fix it. See the diagram attached. God bless you ERR 1 - ...
Question about Bowflex Exercise & Fitness
Bowflex series 7 treadmill Calibration fail. Next indicated action? Once powered up, the motor runs for a second or two and stops. Cannot turn the power switch off, must turn off at main bottom power ...
...1 second and then stops hi, There are two possibilities for this problem 1. Check the speed sensor on near the motor pulley. Remove the sensor and clean it and re-fix it. then make a try. if problem ...
...from control board approx. 1 second after turning on and 2 clicks after shutting off. Please help. It stops and when I unplug it it starts again this happens 4 or 5 times what is wrong? ...
1/4 turn again. Continue until the belt does not slip, but do not tighten the bolts more than 2 full turns. If it takes more than 2 turns then something else is the problem. The second problem that it
Question about Nordic Track Exercise & Fitness
reebok 5500C - when turn on treadmill and increase the speed, the motor has a sudden surge, for approx 1-2 seconds, then stops. hi, Replase the IGBT on the aluminium heat sink. this problem will be ...
Question about Proform Exercise & Fitness
...quits in a second.I have tryed different plugs and I have the same results. What should I do? Question: which breaker is tripped? 1) breaker inside of the machine or 2) breaker froom your
Question about Image Exercise & Fitness
...1 When we start the machine the display lights up and the machine turns on but the belt won't turn. Within 30 seconds the error code E2 1 appears. The manual says to re-set and try again but this ...
2 questions posted
Usually answered in minutes!
1 Questions
3 Questions
1 Questions
2 Questions
2 Questions