2001 Toyota Sequoia "replace upper lower hoses 2007" Questions

...upper radiator hose for building high pressure before the hose is warm(cylinder head gasket is bad) if the car don't overheat with a/c on(radiator fan switch is bad) monitor the temperature to about ...

...upper radiator hose is hot while the coolant inside the coolant filler tank is still cold. I have not located the lower radiator hose and the hose on the filler tank goes to the firewall. Is there a ...

...replace fuel filter for nissan altima 2007 the guy is an idiot , there is no gas filter on the car, it is inside the gas tank and it is inside the gas pump not accessible to be changed, nissan really ...

...replace your coolant. In a 10 year old vehicle, I would also suggest replacing your upper and lower radiator hoses. Since you will have ALL of the coolant out of the system, this is the BEST time to ...

...upper and lower clip. Also, there are two hoses bolted to it on the right side along with the power cables.. Radiator - if you are going to leave it in and work around it, you need to lift it from ...

...upper bracket. 12 Pull out the steering column. 13 Remove the interconnect and bracket that connects the instrument panel to the chassis wiring. 14 Remove the boot from the bottom of the steering ...

...upper pipe is from 210 to 225 F and over radiator lower pipe is also same 210 to 220 F and near thermostat 225 to 230 F inside plastic manifold 230 to 237 F over head cover 210 to 220 F and ...

...upper) is firm when hot and running and input hose (from radiator to engine; usually the lower) is firm and hot. If out from the radiator is but return to the radiator is not then you probably have a ...

...replace --you will need to remove the fan =shroud-upper cover ==and grill --remove the upper and lower hoses and trans coolers lines --remove radiator and condenser --replace --evacuate a/c system ...

...replace a 2007 dodge magnum coolant air bleeder assembly? The upper intake has to come up. The coolant pipe that goes to the back has a clip on it, you can not adjust the pipe until you release that ...